[PATCH 3/3] arm64: dts: marvell: add description for SDHCI controller in CP110 slave

[Thomas Petazzoni]

The two CP110 blocks present in the Armada 8K are identical, so since
there is an SDHCI controller described in the master CP110
description, it should also be described in the slave CP110.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 2e6422a..ef95718 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -258,6 +258,16 @@
 				status = "okay";
 			};
 
+			cps_sdhci0: sdhci at 780000 {
+				compatible = "marvell,armada-cp110-sdhci";
+				reg = <0x780000 0x300>;
+				interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&cps_clk 1 4>;
+				dma-coherent;
+				status = "disabled";
+			};
+
 			cps_crypto: crypto at 800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-- 
2.9.4