[PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it
Chen-Yu Tsai
wens at csie.org
Thu Jul 13 20:13:53 PDT 2017
On Thu, Jul 13, 2017 at 10:12 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Some options were not padded as they should, and the order in the Makefile
> was chaotic. Fix that.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
> drivers/gpu/drm/sun4i/Makefile | 26 +++++++++++++-------------
> 1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
> index e29fd3a2ba9c..42871ee7acf6 100644
> --- a/drivers/gpu/drm/sun4i/Makefile
> +++ b/drivers/gpu/drm/sun4i/Makefile
> @@ -1,23 +1,23 @@
> -sun4i-drm-y += sun4i_drv.o
> -sun4i-drm-y += sun4i_framebuffer.o
> +sun4i-backend-y += sun4i_backend.o sun4i_layer.o
>
> -sun4i-drm-hdmi-y += sun4i_hdmi_enc.o
> -sun4i-drm-hdmi-y += sun4i_hdmi_ddc_clk.o
> -sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o
> +sun4i-drm-y += sun4i_drv.o
> +sun4i-drm-y += sun4i_framebuffer.o
I don't think this applies on top of Jonathan's HDMI I2C patch
you already have queued up.
Also you might want to leave a comment describe what the
ordering should be. Otherwise it will still be messed up
down the road.
ChenYu
>
> -sun4i-tcon-y += sun4i_tcon.o
> -sun4i-tcon-y += sun4i_rgb.o
> -sun4i-tcon-y += sun4i_dotclock.o
> -sun4i-tcon-y += sun4i_crtc.o
> +sun4i-drm-hdmi-y += sun4i_hdmi_enc.o
> +sun4i-drm-hdmi-y += sun4i_hdmi_ddc_clk.o
> +sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o
>
> -sun4i-backend-y += sun4i_backend.o sun4i_layer.o
> +sun4i-tcon-y += sun4i_tcon.o
> +sun4i-tcon-y += sun4i_rgb.o
> +sun4i-tcon-y += sun4i_dotclock.o
> +sun4i-tcon-y += sun4i_crtc.o
>
> -sun8i-mixer-y += sun8i_mixer.o sun8i_layer.o
> +sun8i-mixer-y += sun8i_mixer.o sun8i_layer.o
>
> obj-$(CONFIG_DRM_SUN4I) += sun4i-drm.o sun4i-tcon.o
> obj-$(CONFIG_DRM_SUN4I) += sun6i_drc.o
> obj-$(CONFIG_DRM_SUN4I) += sun4i_tv.o
>
> -obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o
> +obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o
> obj-$(CONFIG_DRM_SUN4I_HDMI) += sun4i-drm-hdmi.o
> -obj-$(CONFIG_DRM_SUN8I_MIXER) += sun8i-mixer.o
> +obj-$(CONFIG_DRM_SUN8I_MIXER) += sun8i-mixer.o
> --
> git-series 0.9.1
More information about the linux-arm-kernel
mailing list