[PATCH 16/18] arm: dts: sun8i: a33: Add the DSI-related nodes

Maxime Ripard maxime.ripard at free-electrons.com
Thu Jul 13 07:13:11 PDT 2017


The A33 has a MIPI-DSI block, along with its D-PHY. Let's add it in order
to use it in the relevant boards.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/boot/dts/sun8i-a33.dtsi | 50 ++++++++++++++++++++++++++++++++-
 1 file changed, 49 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 22660919bd08..18d1bf9f8e84 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -236,10 +236,14 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;
+
+					tcon0_out_dsi0: endpoint at 1 {
+						reg = <1>;
+						remote-endpoint = <&dsi0_in_tcon0>;
+					};
 				};
 			};
 		};
-
 		crypto: crypto-engine at 01c15000 {
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
@@ -280,6 +284,50 @@
 			#io-channel-cells = <0>;
 		};
 
+		dsi0: dsi at 01ca0000 {
+			compatible = "allwinner,sun6i-a31-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_SCLK>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy0>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi0_in: port at 0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					dsi0_in_tcon0: endpoint at 0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_dsi0>;
+					};
+				};
+			};
+		};
+
+		dphy0: d-phy at 01ca1000 {
+			compatible = "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#phy-cells = <0>;
+		};
+
 		fe0: display-frontend at 01e00000 {
 			compatible = "allwinner,sun8i-a33-display-frontend";
 			reg = <0x01e00000 0x20000>;
-- 
git-series 0.9.1



More information about the linux-arm-kernel mailing list