[PATCH 1/2] ARM: dts: imx6ul-evk: Add DRM panel support
Shawn Guo
shawnguo at kernel.org
Thu Jul 13 01:35:14 PDT 2017
On Tue, Jul 11, 2017 at 12:28:22PM -0300, Marco Franchi wrote:
> It is preferred to use the panel compatible string rather than passing the LCD
> timming in the device tree.
>
> So pass the "innolux,at043tn24" compatible string to describe the parallel LCD
> on this board.
>
> Signed-off-by: Marco Franchi <marco.franchi at nxp.com>
> ---
> arch/arm/boot/dts/imx6ul-14x14-evk.dts | 36 ++++++++++++----------------------
> 1 file changed, 13 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> index d2be8aa..e08237f 100644
> --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> @@ -78,6 +78,16 @@
> clocks = <&clks IMX6UL_CLK_SAI2>;
> };
> };
> +
> + panel {
> + compatible = "innolux,at043tn24";
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> + };
> };
>
> &clks {
> @@ -139,31 +149,11 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_lcdif_dat
> &pinctrl_lcdif_ctrl>;
> - display = <&display0>;
> status = "okay";
>
> - display0: display {
> - bits-per-pixel = <16>;
> - bus-width = <24>;
> -
> - display-timings {
> - native-mode = <&timing0>;
> -
> - timing0: timing0 {
> - clock-frequency = <9200000>;
> - hactive = <480>;
> - vactive = <272>;
> - hfront-porch = <8>;
> - hback-porch = <4>;
> - hsync-len = <41>;
> - vback-porch = <2>;
> - vfront-porch = <4>;
> - vsync-len = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> + port{
Miss a space.
Shawn
> + display_out: endpoint {
> + remote-endpoint = <&panel_in>;
> };
> };
> };
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list