[PATCH] ARM: dts: imx: add CX9020 Embedded PC device tree

[Patrick Brünn]

>From: Andrew Lunn [mailto:andrew at lunn.ch]
>Sent: Mittwoch, 12. Juli 2017 16:43
>
>On Wed, Jul 12, 2017 at 11:04:08AM +0200, linux-kernel-dev at beckhoff.com
>wrote:
>> From: Patrick Brünn <p.bruenn at beckhoff.com>
>>
>> The CX9020 differs from i.MX53 Quick Start Board by:
>> - use uart2 instead of uart1
>> - DVI-D connector instead of VGA
>> - no audio
>> - CCAT FPGA connected to emi
>> - enable rtc
>>
>> Signed-off-by: Patrick Brünn <p.bruenn at beckhoff.com>
>> ---
>>  arch/arm/boot/dts/Makefile         |   1 +
>>  arch/arm/boot/dts/imx53-cx9020.dts | 377
>+++++++++++++++++++++++++++++++++++++
>>  2 files changed, 378 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 9c5e1d944d1c..ea60698f9783 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -340,6 +340,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
>>      imx53-ard.dtb \
>>      imx53-m53evk.dtb \
>>      imx53-mba53.dtb \
>> +    imx53-cx9020.dtb \
>>      imx53-qsb.dtb \
>>      imx53-qsrb.dtb \
>>      imx53-smd.dtb \
>
>Hi Patrick
>
>It appears this list is in alphabetic order...
>
Ops, thanks for the hint, will fix this with the next version.
Patrick

Beckhoff Automation GmbH & Co. KG | Managing Director: Dipl. Phys. Hans Beckhoff
Registered office: Verl, Germany | Register court: Guetersloh HRA 7075