[PATCH 4/4] arm64: dts: rockchip: update the thermal zones for RK3399 SoCs

Caesar Wang wxt at rock-chips.com
Tue Jul 11 23:29:30 PDT 2017


As RK3399 had used the Power allocator thermal governor by default,
enabled this to manage thermals by dynamically allocating and limiting
power to devices.

Also, this patch supported the dynamic-power-coefficient/sustainable_power
and GPU's power model for needed parameters with thermal IPA.

Signed-off-by: Caesar Wang <wxt at rock-chips.com>

---

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 62 +++++++++++++++-----------------
 1 file changed, 29 insertions(+), 33 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 8c6438b..139f58c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -147,7 +147,7 @@
 			enable-method = "psci";
 			#cooling-cells = <2>; /* min followed by max */
 			clocks = <&cru ARMCLKB>;
-			dynamic-power-coefficient = <100>;
+			dynamic-power-coefficient = <436>;
 		};
 
 		cpu_b1: cpu at 101 {
@@ -156,7 +156,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKB>;
-			dynamic-power-coefficient = <100>;
+			dynamic-power-coefficient = <436>;
 		};
 	};
 
@@ -690,24 +690,25 @@
 	};
 
 	thermal_zones: thermal-zones {
-		cpu_thermal: cpu {
+		soc_thermal: soc-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <1000>;
+			sustainable-power = <1000>;
 
 			thermal-sensors = <&tsadc 0>;
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				threshold: trip-point at 0 {
 					temperature = <70000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
-				cpu_alert1: cpu_alert1 {
-					temperature = <75000>;
+				target: trip-point at 1 {
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
-				cpu_crit: cpu_crit {
+				soc_crit: soc-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -716,45 +717,31 @@
 
 			cooling-maps {
 				map0 {
-					trip = <&cpu_alert0>;
+					trip = <&target>;
 					cooling-device =
-						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
 				};
 				map1 {
-					trip = <&cpu_alert1>;
+					trip = <&target>;
 					cooling-device =
-						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+				map2 {
+					trip = <&target>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
 				};
 			};
 		};
 
-		gpu_thermal: gpu {
+		gpu_thermal: gpu-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsadc 1>;
-
-			trips {
-				gpu_alert0: gpu_alert0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				gpu_crit: gpu_crit {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&gpu_alert0>;
-					cooling-device =
-						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 	};
 
@@ -1455,8 +1442,17 @@
 		interrupt-names = "GPU", "JOB", "MMU";
 		clocks = <&cru ACLK_GPU>;
 		clock-names = "clk_mali";
+		#cooling-cells = <2>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
+
+		gpu_power_model: power_model {
+			compatible = "arm,mali-simple-power-model";
+			static-coefficient = <1079403>;
+			dynamic-coefficient = <977>;
+			ts = <32000 4700 (-80) 2>;
+			thermal-zone = "gpu-thermal";
+		};
 	};
 
 	pinctrl: pinctrl {
-- 
2.7.4




More information about the linux-arm-kernel mailing list