[PATCH 1/3] dt-bindings: regulator: Add STM32 Voltage Reference Buffer

[Fabrice Gasnier]

Document STM32 VREFBUF (voltage reference buffer) which can be used as
voltage reference for ADCs, DACs and external components.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
---
 .../bindings/regulator/st,stm32-vrefbuf.txt          | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt

diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
new file mode 100644
index 0000000..3944ee3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
@@ -0,0 +1,20 @@
+STM32 VREFBUF - Voltage reference buffer
+
+Some STM32 devices embed a voltage reference buffer which can be used as
+voltage reference for ADCs, DACs and also as voltage reference for external
+components through the dedicated VREF+ pin.
+
+Required properties:
+- compatible:		Must be "st,stm32-vrefbuf".
+- reg:			Offset and length of VREFBUF register set.
+- clocks:		Must contain an entry for peripheral clock.
+
+Example:
+	vrefbuf: regulator at 58003C00 {
+		compatible = "st,stm32-vrefbuf";
+		reg = <0x58003C00 0x8>;
+		clocks = <&rcc VREF_CK>;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <2500000>;
+		vdda-supply = <&vdda>;
+	};
-- 
1.9.1