[PATCH 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC

[Ludovic Desroches]

On Tue, Jul 11, 2017 at 09:58:29AM +0200, Ludovic Desroches wrote:
> On Tue, Jul 11, 2017 at 09:52:58AM +0200, Nicolas Ferre wrote:
> > On 11/07/2017 at 09:40, Ludovic Desroches wrote:
> > > A new compatible string has been introduced for sama5d2 SMC to allow to
> > > manage the registers mapping change.
> > > 
> > > Signed-off-by: Ludovic Desroches <ludovic.desroches at microchip.com>
> > > ---
> > >  arch/arm/boot/dts/sama5d2.dtsi | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> > > index 4fcd5bb219e3..60e69aeacbdb 100644
> > > --- a/arch/arm/boot/dts/sama5d2.dtsi
> > > +++ b/arch/arm/boot/dts/sama5d2.dtsi
> > > @@ -1048,7 +1048,7 @@
> > >  			};
> > >  
> > >  			hsmc: hsmc at f8014000 {
> > > -				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
> > > +				compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
> > 
> > You'd better use something like:
> >  compatible = "atmel,sama5d2-smc", "atmel,sama5d3-smc", "syscon", "simple-mfd";
> 
> But it's not true, during data interface setup, we will write values in
> the wrong place if we fallback on "atmel,sama5d3-smc".
> 
> Regards
> 
> Ludovic
> 
> > 
> > So that this patch is independent from the rest of the series and
> > we can avoid to having to synchronize with mfd or mtd/nand for this part.

If Lee and Boris agree, maybe the series can go through AT91.

Regards

Ludovic

> > 
> > Regards,
> > 
> > >  				reg = <0xf8014000 0x1000>;
> > >  				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
> > >  				clocks = <&hsmc_clk>;
> > > 
> > 
> > 
> > -- 
> > Nicolas Ferre