[linux-sunxi] [PATCH v5 5/6] ARM: sun7i: Convert to CCU

[Olliver Schinagl]

Hi Pleas,

On 04-07-17 22:05, Priit Laes wrote:
> Convert sun7i-a20.dtsi to new CCU driver.
>
> Tested on Cubietruck.
>
> Signed-off-by: Priit Laes <plaes at plaes.org>
> ---
>  arch/arm/boot/dts/sun7i-a20.dtsi | 719 +++-----------------------------
>  1 file changed, 84 insertions(+), 635 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index 96bee77..a5ca5a8 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -46,8 +46,6 @@
>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/thermal/thermal.h>
> -
> -#include <dt-bindings/clock/sun4i-a10-pll2.h>
>  #include <dt-bindings/dma/sun4i-a10.h>
I had to add these includes here to make this all work:

+ #include <dt-bindings/clock/sun4i-a10-ccu.h>
+ #include <dt-bindings/clock/sun7i-a20-ccu.h>
   #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/sun4i-a10-ccu.h>
   #include <dt-bindings/thermal/thermal.h>
   #include <dt-bindings/dma/sun4i-a10.h>

Olliver

>
>  / {
> @@ -66,9 +64,10 @@
>  			compatible = "allwinner,simple-framebuffer",
>  				     "simple-framebuffer";
>  			allwinner,pipeline = "de_be0-lcd0-hdmi";
> -			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
> -				 <&ahb_gates 44>, <&de_be0_clk>,
> -				 <&tcon0_ch1_clk>, <&dram_gates 26>;
> +			clocks = <&ccu 56>, <&ccu 60>,
> +				 <&ccu 62>, <&ccu 144>,
> +				 <&ccu 155>, <&ccu 140>,
> +				 <&ccu 164>;
>  			status = "disabled";
>
<snip>