[PATCH v6 0/3] Add new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag

[Ding Tianhong]

Hi Casey:

On 2017/7/8 10:04, Casey Leedom wrote:
>   Okay, thanks for the note Alexander.	I'll have to look more closely at
> the patch on Monday and try it out on one of the targeted systems to verify
> the semantics you describe.
> 

All the modification is only clearing the device's Device Control{Relaxed Ordering
Enable]bit when distinguish that the platform should not support RO and did nothing
to the RC configuration, so I don't think it will break anything compare to the
first version from yours.

>   However, that said, there is no way to tell a priori where a device will
> send TLPs.  To simply assume that all TLPs will be directed towards the Root
> Complex is a big assumption.  Only the device and the code controlling it
> know where the TLPs will be directed.  That's why there are changes required
> in the cxgb4 driver.  For instance, the code in
> drivers/net/ethernet/chelsio./cxgb4/sge.c: t4_sge_alloc_rxq() knows that
> it's allocating Free List Buffers in Host Memory and that the RX Queues that
> it's allocating in the Hardware will eventually send Ingress Data to those
> Free List Buffers.  (And similarly for the Free List Buffer Pointer Queue
> with respect to DMA Reads from the host.)  In that routine we explicitly
> configure the Hardware to use/not-use the Relaxed Ordering Attribute via the
> FW_IQ_CMD_FL0FETCHRO and FW_IQ_CMD_FL0DATARO flags.  Basically we're
> conditionally setting them based on the desirability of sending Relaxed
> Ordering TLPs to the Root Complex.  (And we would perform the same kind of
> check for an nVME application ... which brings us to ...)
> 
>   And what would be the code using these patch APIs to set up a Peer-to-Peer
> nVME-style application?	 In that case we'd need the Chelsio adapter's PCIe
> Capability Device Control[Relaxed Ordering Enable] set for the nVME
> application ... and we would avoid programming the Chelsio Hardware to use
> Relaxed Ordering for TLPs directed at the Root Complex.	 Thus we would be in
> a position where some TLPs being emitted by the device to Peer devices would
> have Relaxed Ordering set and some directed at the Root Complex would not.
> And the only way for that to work is if the source device's Device
> Control[Relaxed Ordering Enable] is set ...
> 
>   Finally, setting aside my disagreements with the patch, we still have the
> code in the cxgb4 driver which explicitly turns on its own Device
> Control[Relaxed Ordering Enable] in cxgb4_main.c:
> enable_pcie_relaxed_ordering().  So the patch is something of a loop if all
> we're doing is testing our own Relaxed Ordering Enable state ...
>  
> Casey
> 
> .
>