[PATCH v3 2/9] mfd: Add STM32 LPTimer driver

Fabrice Gasnier fabrice.gasnier at st.com
Fri Jul 7 09:31:01 PDT 2017


STM32 Low-Power Timer hardware block can be used for:
- PWM generation
- IIO trigger (in sync with PWM)
- IIO quadrature encoder counter
PWM and IIO timer configuration are mixed in the same registers so
we need a multi fonction driver to be able to share those registers.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
---
Changes in v2:
- Lee's remarks: various comments, max register define, s/Low Power/Low-Power,
  clock name, removed reset, add kernel doc for stm32_lptimer struct
---
 drivers/mfd/Kconfig               |  14 +++++
 drivers/mfd/Makefile              |   1 +
 drivers/mfd/stm32-lptimer.c       | 107 ++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/stm32-lptimer.h |  62 ++++++++++++++++++++++
 4 files changed, 184 insertions(+)
 create mode 100644 drivers/mfd/stm32-lptimer.c
 create mode 100644 include/linux/mfd/stm32-lptimer.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3eb5c93..8e1ca44 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1683,6 +1683,20 @@ config MFD_STW481X
 	  in various ST Microelectronics and ST-Ericsson embedded
 	  Nomadik series.
 
+config MFD_STM32_LPTIMER
+	tristate "Support for STM32 Low-Power Timer"
+	depends on (ARCH_STM32 && OF) || COMPILE_TEST
+	select MFD_CORE
+	select REGMAP
+	select REGMAP_MMIO
+	help
+	  Select this option to enable STM32 Low-Power Timer driver
+	  used for PWM, IIO Trigger, IIO Encoder and Counter. Shared
+	  resources are also dealt with here.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stm32-lptimer.
+
 config MFD_STM32_TIMERS
 	tristate "Support for STM32 Timers"
 	depends on (ARCH_STM32 && OF) || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c16bf1e..a5308d8 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -219,5 +219,6 @@ obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
 obj-$(CONFIG_MFD_ALTERA_A10SR)	+= altera-a10sr.o
 obj-$(CONFIG_MFD_SUN4I_GPADC)	+= sun4i-gpadc.o
 
+obj-$(CONFIG_MFD_STM32_LPTIMER)	+= stm32-lptimer.o
 obj-$(CONFIG_MFD_STM32_TIMERS) 	+= stm32-timers.o
 obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
diff --git a/drivers/mfd/stm32-lptimer.c b/drivers/mfd/stm32-lptimer.c
new file mode 100644
index 0000000..075330a
--- /dev/null
+++ b/drivers/mfd/stm32-lptimer.c
@@ -0,0 +1,107 @@
+/*
+ * STM32 Low-Power Timer parent driver.
+ *
+ * Copyright (C) STMicroelectronics 2017
+ *
+ * Author: Fabrice Gasnier <fabrice.gasnier at st.com>
+ *
+ * Inspired by Benjamin Gaignard's stm32-timers driver
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/mfd/stm32-lptimer.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#define STM32_LPTIM_MAX_REGISTER	0x3fc
+
+static const struct regmap_config stm32_lptimer_regmap_cfg = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = sizeof(u32),
+	.max_register = STM32_LPTIM_MAX_REGISTER,
+};
+
+static int stm32_lptimer_detect_encoder(struct stm32_lptimer *ddata)
+{
+	u32 val;
+	int ret;
+
+	/*
+	 * Quadrature encoder mode bit can only be written and read back when
+	 * Low-Power Timer supports it.
+	 */
+	ret = regmap_update_bits(ddata->regmap, STM32_LPTIM_CFGR,
+				 STM32_LPTIM_ENC, STM32_LPTIM_ENC);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(ddata->regmap, STM32_LPTIM_CFGR, &val);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(ddata->regmap, STM32_LPTIM_CFGR,
+				 STM32_LPTIM_ENC, 0);
+	if (ret)
+		return ret;
+
+	ddata->has_encoder = !!(val & STM32_LPTIM_ENC);
+
+	return 0;
+}
+
+static int stm32_lptimer_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct stm32_lptimer *ddata;
+	struct resource *res;
+	void __iomem *mmio;
+	int ret;
+
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(mmio))
+		return PTR_ERR(mmio);
+
+	ddata->regmap = devm_regmap_init_mmio_clk(dev, "mux", mmio,
+						  &stm32_lptimer_regmap_cfg);
+	if (IS_ERR(ddata->regmap))
+		return PTR_ERR(ddata->regmap);
+
+	ddata->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ddata->clk))
+		return PTR_ERR(ddata->clk);
+
+	ret = stm32_lptimer_detect_encoder(ddata);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, ddata);
+
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static const struct of_device_id stm32_lptimer_of_match[] = {
+	{ .compatible = "st,stm32-lptimer", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_lptimer_of_match);
+
+static struct platform_driver stm32_lptimer_driver = {
+	.probe = stm32_lptimer_probe,
+	.driver = {
+		.name = "stm32-lptimer",
+		.of_match_table = stm32_lptimer_of_match,
+	},
+};
+module_platform_driver(stm32_lptimer_driver);
+
+MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier at st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 Low-Power Timer");
+MODULE_ALIAS("platform:stm32-lptimer");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/stm32-lptimer.h b/include/linux/mfd/stm32-lptimer.h
new file mode 100644
index 0000000..77c7cf4
--- /dev/null
+++ b/include/linux/mfd/stm32-lptimer.h
@@ -0,0 +1,62 @@
+/*
+ * STM32 Low-Power Timer parent driver.
+ *
+ * Copyright (C) STMicroelectronics 2017
+ *
+ * Author: Fabrice Gasnier <fabrice.gasnier at st.com>
+ *
+ * Inspired by Benjamin Gaignard's stm32-timers driver
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#ifndef _LINUX_STM32_LPTIMER_H_
+#define _LINUX_STM32_LPTIMER_H_
+
+#include <linux/clk.h>
+#include <linux/regmap.h>
+
+#define STM32_LPTIM_ISR		0x00	/* Interrupt and Status Reg  */
+#define STM32_LPTIM_ICR		0x04	/* Interrupt Clear Reg       */
+#define STM32_LPTIM_IER		0x08	/* Interrupt Enable Reg      */
+#define STM32_LPTIM_CFGR	0x0C	/* Configuration Reg         */
+#define STM32_LPTIM_CR		0x10	/* Control Reg               */
+#define STM32_LPTIM_CMP		0x14	/* Compare Reg               */
+#define STM32_LPTIM_ARR		0x18	/* Autoreload Reg            */
+#define STM32_LPTIM_CNT		0x1C	/* Counter Reg               */
+
+/* STM32_LPTIM_ISR - bit fields */
+#define STM32_LPTIM_CMPOK_ARROK		GENMASK(4, 3)
+#define STM32_LPTIM_ARROK		BIT(4)
+#define STM32_LPTIM_CMPOK		BIT(3)
+
+/* STM32_LPTIM_ICR - bit fields */
+#define STM32_LPTIM_CMPOKCF_ARROKCF	GENMASK(4, 3)
+
+/* STM32_LPTIM_CR - bit fields */
+#define STM32_LPTIM_CNTSTRT	BIT(2)
+#define STM32_LPTIM_ENABLE	BIT(0)
+
+/* STM32_LPTIM_CFGR - bit fields */
+#define STM32_LPTIM_ENC		BIT(24)
+#define STM32_LPTIM_COUNTMODE	BIT(23)
+#define STM32_LPTIM_WAVPOL	BIT(21)
+#define STM32_LPTIM_PRESC	GENMASK(11, 9)
+#define STM32_LPTIM_CKPOL	GENMASK(2, 1)
+
+/* STM32_LPTIM_ARR */
+#define STM32_LPTIM_MAX_ARR	0xFFFF
+
+/**
+ * struct stm32_lptimer - STM32 Low-Power Timer data assigned by parent device
+ * @clk: clock reference for this instance
+ * @regmap: register map reference for this instance
+ * @has_encoder: indicates this Low-Power Timer supports encoder mode
+ */
+struct stm32_lptimer {
+	struct clk *clk;
+	struct regmap *regmap;
+	bool has_encoder;
+};
+
+#endif
-- 
1.9.1




More information about the linux-arm-kernel mailing list