[PATCH 8/8] ARM: dts: stm32: add support of exti on stm32h743 pinctrl

[Alexandre Torgue]

Hi Ludovic

On 07/07/2017 09:26 AM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre at st.com>
> 
> Signed-off-by: Ludovic Barre <ludovic.barre at st.com>
> ---

Can you fill commit message please


>   arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 24 ++++++++++++++++++++++++
>   1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
> index fcc1e06..8854d26 100644
> --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
> @@ -49,6 +49,8 @@
>   			#size-cells = <1>;
>   			compatible = "st,stm32h743-pinctrl";
>   			ranges = <0 0x58020000 0x3000>;
> +			interrupt-parent = <&exti>;
> +			st,syscfg = <&syscfg 0x8>;
>   			pins-are-numbered;
>   
>   			gpioa: gpio at 58020000 {
> @@ -57,6 +59,8 @@
>   				reg = <0x0 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOA";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			gpiob: gpio at 58020400 {
> @@ -65,6 +69,8 @@
>   				reg = <0x400 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOB";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			gpioc: gpio at 58020800 {
> @@ -73,6 +79,8 @@
>   				reg = <0x800 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOC";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			gpiod: gpio at 58020c00 {
> @@ -81,6 +89,8 @@
>   				reg = <0xc00 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOD";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			gpioe: gpio at 58021000 {
> @@ -89,6 +99,8 @@
>   				reg = <0x1000 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOE";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			gpiof: gpio at 58021400 {
> @@ -97,6 +109,8 @@
>   				reg = <0x1400 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOF";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			gpiog: gpio at 58021800 {
> @@ -105,6 +119,8 @@
>   				reg = <0x1800 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOG";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			gpioh: gpio at 58021c00 {
> @@ -113,6 +129,8 @@
>   				reg = <0x1c00 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOH";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			gpioi: gpio at 58022000 {
> @@ -121,6 +139,8 @@
>   				reg = <0x2000 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOI";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			gpioj: gpio at 58022400 {
> @@ -129,6 +149,8 @@
>   				reg = <0x2400 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOJ";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			gpiok: gpio at 58022800 {
> @@ -137,6 +159,8 @@
>   				reg = <0x2800 0x400>;
>   				clocks = <&timer_clk>;
>   				st,bank-name = "GPIOK";
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
>   			};
>   
>   			usart1_pins: usart1 at 0 {
>