[PATCH] arm64: dts: marvell: mcbin: Enable PCIe interface

[Jisheng Zhang]

On Wed, 5 Jul 2017 18:44:03 +0100 Russell King - ARM Linux wrote:

> On Wed, Jul 05, 2017 at 06:36:53PM +0100, Ard Biesheuvel wrote:
> > On 5 July 2017 at 18:16, Russell King - ARM Linux <linux at armlinux.org.uk> wrote:  
> > > On Wed, Jul 05, 2017 at 06:13:33PM +0200, Gregory CLEMENT wrote:  
> > >> Enable the PCIe interface on the MACCHIATOBin board. It is located on
> > >> CON12 and is 4 lanes capable.
> > >>
> > >> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>  
> > >
> > > Why do you folk at free-electrons like doing half a job all the friggin
> > > time?
> > >
> > > You know I have complete patches for mcbin, but you pointedly won't look
> > > at them at all - except when you have a problem and want to test my tree.
> > > And even then, you ignore my work (despite testing that it works), and
> > > you still recreate my patches.
> > >
> > > This is really frustrating and insane behaviour on your part.
> > >
> > > Here's what I have:
> > >
> > > +&cpm_pcie0 {
> > > +       pinctrl-names = "default";
> > > +       pinctrl-0 = <&cpm_pcie_pins>;
> > > +       num-lanes = <4>;
> > > +       reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>;
> > > +       status = "okay";  
> > 
> > This needs 'num-viewport = <8>' as well, or the crazy Synopsys DWC

IMHO, maybe putting this property into dtsi is better.

Thanks,
Jisheng

> > PCIe driver will happily reconfigure the I/O window at runtime to
> > perform config space accesses, without any locking whatsoever.  
> 
> Thanks for the feedback, I'll integrate that change into my patch, so
> it's ready for when I rebase after -rc1.
>