[PATCH 1/6] ARM: dts: rockchip: add regulator nodes for rk3229-evb

Frank Wang frank.wang at rock-chips.com
Tue Jul 4 02:37:19 PDT 2017


Hi Heiko,

On 2017/7/4 16:34, Heiko Stübner wrote:
> Hi Frank,
>
> Am Dienstag, 4. Juli 2017, 16:12:42 CEST schrieb Frank Wang:
>> This patch adds vcc_io, vdd_arm and vdd_log regulator nodes
>> for rk3229-evb board.
>>
>> Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
>> ---
>>   arch/arm/boot/dts/rk3229-evb.dts | 54
>> ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3229-evb.dts
>> b/arch/arm/boot/dts/rk3229-evb.dts index 82e8a53..8b10c64 100644
>> --- a/arch/arm/boot/dts/rk3229-evb.dts
>> +++ b/arch/arm/boot/dts/rk3229-evb.dts
>> @@ -78,6 +78,52 @@
>>   		regulator-always-on;
>>   		regulator-boot-on;
>>   	};
>> +
>> +	vdd_arm: vdd-arm-regulator {
>> +		compatible = "pwm-regulator";
>> +		rockchip,pwm_id = <1>;
>> +		rockchip,pwm_voltage = <1100000>;
> This doesn't look like a part of the mainline pwm-regulator binding
> (both rockchip,* properties)
>
>> +		pwms = <&pwm1 0 25000 1>;
>> +		regulator-name = "vdd_arm";
>> +		regulator-min-microvolt = <950000>;
>> +		regulator-max-microvolt = <1400000>;
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
> please also add supplies for regulators. Information on supplies
> should be easily extractable from the board schematics.
>
> This not only results in a nice tree in debugfs (regulator/regulator_summary)
> but also makes sure supplying regulators are not accidentially turned off.
> (pwm-supply for pwm-regulators, vin-supply for fixed regulators)
>
>
>> +
>> +	vdd_log: vdd-log-regulator {
>> +		compatible = "pwm-regulator";
>> +		rockchip,pwm_id = <2>;
>> +		rockchip,pwm_voltage = <1200000>;
>> +		pwms = <&pwm2 0 25000 1>;
>> +		regulator-name = "vdd_log";
>> +		regulator-min-microvolt = <1000000>;
>> +		regulator-max-microvolt = <1300000>;
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>> +	regulators {
>> +		compatible = "simple-bus";
> don't create a subnode/bus for regulators. Just add them
> regularly. Take a look at all the other boards (like rk3399-firefly,
> gru, veyron) for reference.
>
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		vccio_1v8_reg: regulator at 0 {
> Same here, no regulator at 0 please, just name this one
> 	vccio_1v8: vccio-1v8-regulator {
>
> (removed _reg from phandle and changed node name)
>
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "vccio_1v8";
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		vccio_3v3_reg: regulator at 1 {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "vccio_3v3";
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-always-on;
>> +		};
>> +	};
>>   };

Thanks and noted your comments above. I will fix them (also include 
another comment about eMMC in PATCH 4/6 ) and resend these series soon.


BR.
Frank

>
> Thanks
> Heiko
>
>




More information about the linux-arm-kernel mailing list