[PATCH v4 2/3] arm64: kvm: route synchronous external abort exceptions to el2

[Christoffer Dall]

Hi  Dongjiu,

On Tue, Jul 04, 2017 at 02:30:21PM +0800, gengdongjiu wrote:
> Hi Christoffer,
> 
> On 2017/7/3 16:23, Christoffer Dall wrote:
> > On Tue, Jun 27, 2017 at 08:15:49PM +0800, gengdongjiu wrote:
> >> correct the commit message:
> >>
> >>  In the firmware-first RAS solution, OS receives an synchronous
> >>  external abort, then trapped to EL3 by SCR_EL3.EA. Firmware inspects
> >>  the HCR_EL2.TEA and chooses the target to send APEI's SEA notification.
> >>  If the SCR_EL3.EA is set, delegates the error exception to the hypervisor,
> >>  otherwise it delegates to the host OS kernel
> > 
> > This commit text has nothing (directly) to do with the content of the
> > patch.  Whether or not seting these bits are used by firmware to emulate
> > injecting an exception or by the CPU raising a an exception is not the
> > core of the issue.
> > 
> > Please describe your change, then provide rationale.
> 
> (1)Below hcr_el2.TEA/TERR two field is introduced by armv8.2, RAS extension.
> 
> TEA, bit [37]
> 	Route synchronous External Abort exceptions to EL2. The possible values of this bit are:
> 	0 Do not route synchronous External Abort exceptions from Non-secure EL0 and EL1 to EL2.
> 	1 Route synchronous External Abort exceptions from Non-secure EL0 and EL1 to EL2, if not routed
> 	to EL3.
> 	This bit is RES0 if the RAS extension is not implemented.
> TERR, bit [36]
> 	Trap Error record accesses. The possible values of this bit are:
> 	0 Do not trap accesses to error record registers from Non-secure EL1 to EL2.
> 	1 Accesses to the ER* registers from Non-secure EL1 generate a Trap exception to EL2.
> 	This bit is RES0 if the RAS extension is not implemented.
> 
> (2) when synchronous External Abort(SEA) OS happen SEA, it trap to EL3 firmware.
> then the firmware needs to do by faking an exception entry to  hypervisor EL2; or
> by faking an exception entry to EL1
> so if the hcr_el2.TEA is set, firmware will eret to EL2; otherwise, eret to EL1.
> hcr_el2.TEA is only set for the guest OS.
> not set for the host OS.
> 
> 
> (3) setting hcr_el2.HCR_TERR want to trap the EL1 error record access to EL2.


So again, I was more asking for a new commit message for the next
version of the patch rather than an explanation here.  But I the commit
message should not mention assumptions about how EL3 firmware works, but
try to stay within the semantics laid out by the ARM architecture.

For example:

  ARMv8.2 introduces two new bits, TEA and TERR, which [...].  When RAS
  is available, we set these bits on the HCR_EL2, because we want to
  take external aborts to EL2 in order for [...].



Thanks,
-Christoffer


> 
> 
> > 
> > Thanks,
> > -Christoffer
> > 
> > 
> >>
> >>
> >> On 2017/6/26 20:45, Dongjiu Geng wrote:
> >>> In the firmware-first RAS solution, guest OS receives an synchronous
> >>> external abort, then trapped to EL3 by SCR_EL3.EA. Firmware inspects
> >>> the HCR_EL2.TEA and chooses the target to send APEI's SEA notification.
> >>> If the SCR_EL3.EA is set, delegates the error exception to the hypervisor,
> >>> otherwise it delegates to the guest OS kernel
> >>>
> >>> Signed-off-by: Dongjiu Geng <gengdongjiu at huawei.com>
> >>> ---
> >>>  arch/arm64/include/asm/kvm_arm.h     | 2 ++
> >>>  arch/arm64/include/asm/kvm_emulate.h | 7 +++++++
> >>>  2 files changed, 9 insertions(+)
> >>>
> >>> diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
> >>> index 61d694c..1188272 100644
> >>> --- a/arch/arm64/include/asm/kvm_arm.h
> >>> +++ b/arch/arm64/include/asm/kvm_arm.h
> >>> @@ -23,6 +23,8 @@
> >>>  #include <asm/types.h>
> >>>  
> >>>  /* Hyp Configuration Register (HCR) bits */
> >>> +#define HCR_TEA		(UL(1) << 37)
> >>> +#define HCR_TERR	(UL(1) << 36)
> >>>  #define HCR_E2H		(UL(1) << 34)
> >>>  #define HCR_ID		(UL(1) << 33)
> >>>  #define HCR_CD		(UL(1) << 32)
> >>> diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> >>> index f5ea0ba..5f64ab2 100644
> >>> --- a/arch/arm64/include/asm/kvm_emulate.h
> >>> +++ b/arch/arm64/include/asm/kvm_emulate.h
> >>> @@ -47,6 +47,13 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
> >>>  	vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS;
> >>>  	if (is_kernel_in_hyp_mode())
> >>>  		vcpu->arch.hcr_el2 |= HCR_E2H;
> >>> +	if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) {
> >>> +		/* route synchronous external abort exceptions to EL2 */
> >>> +		vcpu->arch.hcr_el2 |= HCR_TEA;
> >>> +		/* trap error record accesses */
> >>> +		vcpu->arch.hcr_el2 |= HCR_TERR;
> >>> +	}
> >>> +
> >>>  	if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
> >>>  		vcpu->arch.hcr_el2 &= ~HCR_RW;
> >>>  }
> >>>
> >>
> > 
> > .
> > 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel