[PATCH v2 00/52] irqchip: KVM: Add support for GICv4
Shanker Donthineni
shankerd at codeaurora.org
Sat Jul 1 07:54:56 PDT 2017
Hi Marc,
I've verified the basic GICv4 functionality with v2 series + Eric's IRQ
bypass patches on QDF2400 platform with a minor change in vgic-init.c
successfully. Nice, I don't see any deadlock or catastrophic issues
running on QCOM hardware. You can add my tested-by, I'll provide comments
after reviewing giant v2 series.
Tested-by: Shanker Donthineni <shankerd at codeaurora.org>
-----Original Message-----
From: linux-arm-kernel [mailto:linux-arm-kernel-bounces at lists.infradead.org]
On Behalf Of Marc Zyngier
Sent: Wednesday, June 28, 2017 10:03 AM
To: linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
kvmarm at lists.cs.columbia.edu
Cc: Mark Rutland <mark.rutland at arm.com>; Jason Cooper
<jason at lakedaemon.net>; Eric Auger <eric.auger at redhat.com>; Christoffer Dall
<christoffer.dall at linaro.org>; Thomas Gleixner <tglx at linutronix.de>; Shanker
Donthineni <shankerd at codeaurora.org>
Subject: [PATCH v2 00/52] irqchip: KVM: Add support for GICv4
Yes, it's been a long time coming, but I really wasn't looking forward to
picking this up again. Anyway...
This (monster of a) series implements full support for GICv4, bringing
direct injection of MSIs to KVM on arm and arm64, assuming you have the
right hardware (which is quite unlikely).
To get an idea of the design, I'd recommend you start with patch #32, which
tries to shed some light on the approach that I've taken. And before that,
please digest some of the GICv3/GICv4 architecture documentation[1] (less
than 800 pages!). Once you feel reasonably insane, you'll be in the right
mood to read the code.
The structure of the series is fairly simple. The initial 34 patches add
some generic support for GICv4, while the rest of the code plugs KVM into
it. This series relies on Eric Auger's irq-bypass series[2], which is a
prerequisite for this work.
The stack has been *very lightly* tested on an arm64 model, with a PCI
virtio block device passed from the host to a guest (using kvmtool and
Jean-Philippe Brucker's excellent VFIO support patches[3]). As it has never
seen any HW, I expect things to be subtly broken, so go forward and test if
you can, though I'm mostly interested in people reviewing the code at the
moment.
I've pushed out a branch based on 4.12-rc6 containing the dependencies (as
well as a couple of debug patches):
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git
kvm-arm64/gicv4-kvm
* From v1:
- The bulk of the 30-something initial patches have seen countless
bugs being fixed, and some key data structures have been subtly
tweaked (or killed altogether). They are still quite similar to
what I had in v1 though.
- The whole KVM code is brand new and as I said above, only lightly
tested.
- Collected a bunch a R-bs from Thomas and Eric (many thanks, guys).
[1]
https://static.docs.arm.com/ihi0069/c/IHI0069C_gic_architecture_specificatio
n.pdf
[2] http://www.spinics.net/lists/kvm/msg151463.html
[3] http://www.spinics.net/lists/kvm/msg151823.html
Marc Zyngier (52):
genirq: Let irq_set_vcpu_affinity() iterate over hierarchy
irqchip/gic-v3: Add redistributor iterator
irqchip/gic-v3: Add VLPI/DirectLPI discovery
irqchip/gic-v3-its: Move LPI definitions around
irqchip/gic-v3-its: Add probing for VLPI properties
irqchip/gic-v3-its: Macro-ize its_send_single_command
irqchip/gic-v3-its: Implement irq_set_irqchip_state for pending state
irqchip/gic-v3-its: Split out property table allocation
irqchip/gic-v3-its: Allow use of indirect VCPU tables
irqchip/gic-v3-its: Split out pending table allocation
irqchip/gic-v3-its: Rework LPI freeing
irqchip/gic-v3-its: Generalize device table allocation
irqchip/gic-v3-its: Generalize LPI configuration
irqchip/gic-v4: Add management structure definitions
irqchip/gic-v3-its: Add GICv4 ITS command definitions
irqchip/gic-v3-its: Add VLPI configuration hook
irqchip/gic-v3-its: Add VLPI map/unmap operations
irqchip/gic-v3-its: Add VLPI configuration handling
irqchip/gic-v3-its: Add VPE domain infrastructure
irqchip/gic-v3-its: Add VPE irq domain allocation/teardown
irqchip/gic-v3-its: Add VPE irq domain [de]activation
irqchip/gic-v3-its: Add VPENDBASER/VPROPBASER accessors
irqchip/gic-v3-its: Add VPE scheduling
irqchip/gic-v3-its: Add VPE invalidation hook
irqchip/gic-v3-its: Add VPE affinity changes
irqchip/gic-v3-its: Add VPE interrupt masking
irqchip/gic-v3-its: Support VPE doorbell invalidation even when
!DirectLPI
irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs
irqchip/gic-v4: Add per-VM VPE domain creation
irqchip/gic-v4: Add VPE command interface
irqchip/gic-v4: Add VLPI configuration interface
irqchip/gic-v4: Add some basic documentation
irqchip/gic-v4: Enable low-level GICv4 operations
irqchip/gic-v3: Advertise GICv4 support to KVM
KVM: arm/arm64: vgic: Move kvm_vgic_destroy call around
KVM: arm/arm64: vITS: Add MSI translation helpers
KVM: arm/arm64: GICv4: Add init and teardown of the vPE irq domain
KVM: arm/arm64: GICv4: Wire init/teardown of per-VM support
KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq
bypass
KVM: arm/arm64: GICv4: Handle INT command applied to a VLPI
KVM: arm/arm64: GICv4: Unmap VLPI when freeing an LPI
KVM: arm/arm64: GICv4: Handle MOVI applied to a VLPI
KVM: arm/arm64: GICv4: Handle CLEAR applied to a VLPI
KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE
KVM: arm/arm64: GICv4: Propagate property updates to VLPIs
KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE
KVM: arm/arm64: GICv4: Propagate VLPI properties at map time
KVM: arm/arm64: GICv4: Add doorbell interrupt handling
KVM: arm/arm64: GICv4: Hook vPE scheduling into vgic flush/sync
KVM: arm/arm64: GICv4: Enable virtual cpuif if VLPIs can be delivered
KVM: arm/arm64: GICv4: Use pending_last as a scheduling hint
KVM: arm/arm64: GICv4: Enable VLPI support
arch/arm/include/asm/arch_gicv3.h | 33 +
arch/arm/kvm/Makefile | 1 +
arch/arm64/include/asm/arch_gicv3.h | 6 +
arch/arm64/kvm/Makefile | 1 +
drivers/irqchip/Makefile | 2 +-
drivers/irqchip/irq-gic-v3-its.c | 1288
+++++++++++++++++++++++++++++---
drivers/irqchip/irq-gic-v3.c | 93 ++-
drivers/irqchip/irq-gic-v4.c | 209 ++++++
include/kvm/arm_vgic.h | 19 +
include/linux/irqchip/arm-gic-common.h | 2 +
include/linux/irqchip/arm-gic-v3.h | 84 +++
include/linux/irqchip/arm-gic-v4.h | 102 +++
kernel/irq/manage.c | 14 +-
virt/kvm/arm/arm.c | 31 +-
virt/kvm/arm/hyp/vgic-v3-sr.c | 9 +-
virt/kvm/arm/vgic/vgic-init.c | 11 +-
virt/kvm/arm/vgic/vgic-its.c | 165 ++--
virt/kvm/arm/vgic/vgic-v3.c | 6 +
virt/kvm/arm/vgic/vgic-v4.c | 210 ++++++
virt/kvm/arm/vgic/vgic.c | 7 +
virt/kvm/arm/vgic/vgic.h | 10 +
21 files changed, 2103 insertions(+), 200 deletions(-) create mode 100644
drivers/irqchip/irq-gic-v4.c create mode 100644
include/linux/irqchip/arm-gic-v4.h
create mode 100644 virt/kvm/arm/vgic/vgic-v4.c
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list