[PATCH 0/8] ADD STM32H743 MCU and STM32H743i-Eval board supports
Alexandre TORGUE
alexandre.torgue at st.com
Tue Jan 31 05:14:17 PST 2017
This series adds basic support for STM32H743 MCU and stm32h743i-eval board.
With it, you can boot stm32h743i-eval board successfully.
For your information:
The STMicrolectornics's STM32H743 MCU has the following main features:
- Cortex-M7 core running up to @400MHz
- 2MB internal flash, about 1MBytes internal RAM
- FMC controller to connect SDRAM, NOR and NAND memories
- Dual mode QSPI
- SD/MMC/SDIO support
- Ethernet controller
- USB OTFG FS & HS controllers
- I2C, SPI, CAN busses support
- Several 16 & 32 bits general purpose timers
- Serial Audio interface
- LCD controller
- HDMI-CEC
- SPDIFRX
Regards
Alex
Alexandre TORGUE (8):
include: dt-bindings: Add STM32H7 pinctrl DT bindings
pinctrl: stm32: Add STM32H743 MCU support
Documentation: dt-bindings: Add STM32 pinctrl driver DT bindings
ARM: stm32: create dedicated kconfig for STM32 machine
ARM: stm32: Add a new SOC - STM32H743
ARM: stm32: Introduce MACH_STM32H743 flag
ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board
ARM: configs: Add new config fragment to change RAM start point
Documentation/arm/stm32/stm32h743-overview.txt | 30 +
.../bindings/pinctrl/st,stm32-pinctrl.txt | 1 +
arch/arm/Kconfig | 24 +-
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 156 ++
arch/arm/boot/dts/stm32h743.dtsi | 83 +
arch/arm/boot/dts/stm32h743i-eval.dts | 74 +
arch/arm/configs/dram_0xd0000000.config | 1 +
arch/arm/mach-stm32/Kconfig | 26 +
arch/arm/mach-stm32/board-dt.c | 1 +
drivers/pinctrl/stm32/Kconfig | 5 +
drivers/pinctrl/stm32/Makefile | 1 +
drivers/pinctrl/stm32/pinctrl-stm32h743.c | 1980 ++++++++++++++++++++
include/dt-bindings/pinctrl/stm32h7-pinfunc.h | 1612 ++++++++++++++++
14 files changed, 3974 insertions(+), 23 deletions(-)
create mode 100644 Documentation/arm/stm32/stm32h743-overview.txt
create mode 100644 arch/arm/boot/dts/stm32h743-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32h743.dtsi
create mode 100644 arch/arm/boot/dts/stm32h743i-eval.dts
create mode 100644 arch/arm/configs/dram_0xd0000000.config
create mode 100644 arch/arm/mach-stm32/Kconfig
create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32h743.c
create mode 100644 include/dt-bindings/pinctrl/stm32h7-pinfunc.h
--
1.9.1
More information about the linux-arm-kernel
mailing list