[GIT PULL] Allwinner DT changes for 4.11
Maxime Ripard
maxime.ripard at free-electrons.com
Tue Jan 31 00:56:26 PST 2017
Hi Arnd, Olof,
Please pull the following changes for the next merge window.
Thanks!
Maxime
The following changes since commit 1edcd36fcb48fe841bcc62eda36c105037d9583c:
ARM: sunxi: Convert pinctrl nodes to generic bindings (2016-12-26 08:27:11 +0100)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-4.11
for you to fetch changes up to ef09e0f539f124c67aa44d4154730bc8492196bf:
ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2 (2017-01-27 21:09:58 +0100)
----------------------------------------------------------------
Allwinner DT changes for 4.11
The usual chunk of DT changes, most notably:
- Support for the H2+ and the V3s
- CPUFreq support for the A33
- SPDIF support for the A31 and H3
- New boards: Beelink X2, Lichee Pi One, Lichee Pi Zero,
Orange Pi Zero
----------------------------------------------------------------
Chen-Yu Tsai (8):
ARM: dts: sunxi: Explicitly enable pull-ups for MMC pins
ARM: dts: sun6i: hummingbird: Enable USB OTG
ARM: dts: sun8i: Add codec analog path controls node in PRCM for A23/A33
ARM: dts: sun8i-a23: Add device node for internal audio codec
ARM: dts: sun8i-a23: q8-tablet: Enable internal audio codec
ARM: dts: sun8i-h3: Add device nodes for audio codec and its analog controls
ARM: dts: sun8i-h3: orange-pi-pc: Enable audio codec
ARM: dts: sun6i: sina31s: Enable USB OTG controller in peripheral mode
Emmanuel Vadot (3):
ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2
ARM: dts: sunxi: Add num-cs for A20 spi nodes
ARM: dts: sunxi: Enable UEXT related nodes for Olimex A20 SOM EVB
Icenowy Zheng (11):
ARM: dts: sunxi: add support for Orange Pi Zero board
ARM: dts: sun8i: add a cpu0 label to cpu at 0 node on A23/33
ARM: dts: sun8i: set cpu-supply in reference tablet DTSI
ARM: dts: sun8i: add opp-v2 table for A33
ARM: dts: sun8i: add a delay after reset xr819 on Orange Pi Zero
ARM: dts: sun5i: add a pinctrl node for 4bit mmc2
dt-bindings: add vendor prefix for Lichee Pi
ARM: dts: sun5i: add support for Lichee Pi One board
devicetree: bindings: Add vendor prefix for Shenzhen Xunlong Software
ARM: dts: sunxi: add dtsi file for V3s SoC
ARM: dts: sunxi: add support for Lichee Pi Zero board
Jörg Krause (2):
ARM: dts: sun7i: Enable audio codec on Banana Pro
ARM: dts: sun7i: Add wifi dt node on Banana Pro
Marcus Cooper (9):
ARM: dts: sun6i: Mele I7: Enable internal audio codec
ARM: dts: sun6i: Add SPDIF TX pin to the A31
ARM: dts: sun6i: Add the SPDIF block to the A31
ARM: dts: sun4i: A1000: add axp209 regulator nodes
ARM: dts: sun6i: Add SPDIF to the Mele I7
ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB
ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3
ARM: dts: sun8i-h3: Add the SPDIF block to the H3
ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2
Maxime Ripard (3):
ARM: sun8i: a23/a33: Enable the real LOSC and use it
ARM: sun8i: a23/a33: Add the oscillators accuracy
ARM: sun8i: sina33: Enable display
Quentin Schulz (6):
dt-bindings: power: axp20x-usb: add axp223 compatible
ARM: dts: add DTSI for AXP223
ARM: dts: sun8i: a33-olinuxino: use AXP223 DTSI
ARM: dts: sun8i: sina33: use AXP223 DTSI
ARM: dts: sun8i: parrot: use AXP223 DTSI
ARM: dts: sun8i: reference-design: use AXP223 DTSI
.../bindings/power/supply/axp20x_usb_power.txt | 5 +
.../devicetree/bindings/vendor-prefixes.txt | 2 +
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/boot/dts/axp223.dtsi | 58 ++++
arch/arm/boot/dts/sun4i-a10-a1000.dts | 31 +++
arch/arm/boot/dts/sun4i-a10.dtsi | 1 +
arch/arm/boot/dts/sun5i-a13-licheepi-one.dts | 224 +++++++++++++++
arch/arm/boot/dts/sun5i.dtsi | 9 +
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 19 ++
arch/arm/boot/dts/sun6i-a31-i7.dts | 30 ++
arch/arm/boot/dts/sun6i-a31.dtsi | 22 ++
arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 5 +
arch/arm/boot/dts/sun7i-a20-bananapro.dts | 33 ++-
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 38 +++
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 90 +++---
arch/arm/boot/dts/sun7i-a20.dtsi | 6 +
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 24 +-
arch/arm/boot/dts/sun8i-a23-q8-tablet.dts | 23 ++
arch/arm/boot/dts/sun8i-a23.dtsi | 16 ++
arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 2 +-
arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 36 ++-
arch/arm/boot/dts/sun8i-a33.dtsi | 35 +++
arch/arm/boot/dts/sun8i-a83t.dtsi | 1 +
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 160 +++++++++++
arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 160 +++++++++++
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 +
arch/arm/boot/dts/sun8i-h3.dtsi | 40 +++
arch/arm/boot/dts/sun8i-r16-parrot.dts | 2 +-
.../boot/dts/sun8i-reference-design-tablet.dtsi | 6 +-
arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts | 103 +++++++
arch/arm/boot/dts/sun8i-v3s.dtsi | 309 +++++++++++++++++++++
arch/arm/boot/dts/sun9i-a80.dtsi | 3 +
32 files changed, 1436 insertions(+), 71 deletions(-)
create mode 100644 arch/arm/boot/dts/axp223.dtsi
create mode 100644 arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
create mode 100644 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
create mode 100644 arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
create mode 100644 arch/arm/boot/dts/sun8i-v3s.dtsi
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170131/f6368bb9/attachment.sig>
More information about the linux-arm-kernel
mailing list