[PATCH net-next v7 3/3] net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141
Gregory CLEMENT
gregory.clement at free-electrons.com
Mon Jan 30 11:29:35 PST 2017
The Marvell 88E6341 device is single-chip, 6-port Ethernet switch with
four integrated 10/100/1000Mbps Ethernet transceivers and one high speed
SerDes interfaces.
It belongs to the Topaz family and unlike the 88E6341 it does not have
a TCAM.
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
---
drivers/net/dsa/mv88e6xxx/chip.c | 42 ++++++++++++++++++++++++++++-
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 2 +-
2 files changed, 44 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 6a583527917d..bf385377a461 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3656,6 +3656,34 @@ static const struct mv88e6xxx_ops mv88e6352_ops = {
.reset = mv88e6352_g1_reset,
};
+static const struct mv88e6xxx_ops mv88e6141_ops = {
+ /* MV88E6XXX_FAMILY_6341 */
+ .get_eeprom = mv88e6xxx_g2_get_eeprom8,
+ .set_eeprom = mv88e6xxx_g2_set_eeprom8,
+ .set_switch_mac = mv88e6xxx_g2_set_switch_mac,
+ .phy_read = mv88e6xxx_g2_smi_phy_read,
+ .phy_write = mv88e6xxx_g2_smi_phy_write,
+ .port_set_link = mv88e6xxx_port_set_link,
+ .port_set_duplex = mv88e6xxx_port_set_duplex,
+ .port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
+ .port_set_speed = mv88e6390_port_set_speed,
+ .port_tag_remap = mv88e6095_port_tag_remap,
+ .port_set_frame_mode = mv88e6351_port_set_frame_mode,
+ .port_set_egress_unknowns = mv88e6351_port_set_egress_unknowns,
+ .port_set_ether_type = mv88e6351_port_set_ether_type,
+ .port_jumbo_config = mv88e6165_port_jumbo_config,
+ .port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting,
+ .port_pause_config = mv88e6097_port_pause_config,
+ .stats_snapshot = mv88e6390_g1_stats_snapshot,
+ .stats_get_sset_count = mv88e6320_stats_get_sset_count,
+ .stats_get_strings = mv88e6320_stats_get_strings,
+ .stats_get_stats = mv88e6390_stats_get_stats,
+ .g1_set_cpu_port = mv88e6390_g1_set_cpu_port,
+ .g1_set_egress_port = mv88e6390_g1_set_egress_port,
+ .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
+ .reset = mv88e6352_g1_reset,
+};
+
static const struct mv88e6xxx_ops mv88e6341_ops = {
/* MV88E6XXX_FAMILY_6341 */
.get_eeprom = mv88e6xxx_g2_get_eeprom8,
@@ -4071,6 +4099,20 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.ops = &mv88e6321_ops,
},
+ [MV88E6141] = {
+ .prod_num = PORT_SWITCH_ID_PROD_NUM_6141,
+ .family = MV88E6XXX_FAMILY_6341,
+ .name = "Marvell 88E6341",
+ .num_databases = 4096,
+ .num_ports = 6,
+ .port_base_addr = 0x10,
+ .global1_addr = 0x1b,
+ .age_time_coeff = 3750,
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
+ .flags = MV88E6XXX_FLAGS_FAMILY_6341,
+ .ops = &mv88e6141_ops,
+ },
+
[MV88E6341] = {
.prod_num = PORT_SWITCH_ID_PROD_NUM_6341,
.family = MV88E6XXX_FAMILY_6341,
diff --git a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
index 76837d2022bb..9c5c0472b211 100644
--- a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
@@ -87,6 +87,7 @@
#define PORT_SWITCH_ID_PROD_NUM_6131 0x106
#define PORT_SWITCH_ID_PROD_NUM_6320 0x115
#define PORT_SWITCH_ID_PROD_NUM_6123 0x121
+#define PORT_SWITCH_ID_PROD_NUM_6141 0x340
#define PORT_SWITCH_ID_PROD_NUM_6161 0x161
#define PORT_SWITCH_ID_PROD_NUM_6165 0x165
#define PORT_SWITCH_ID_PROD_NUM_6171 0x171
@@ -421,6 +422,7 @@ enum mv88e6xxx_model {
MV88E6097,
MV88E6123,
MV88E6131,
+ MV88E6141,
MV88E6161,
MV88E6165,
MV88E6171,
--
git-series 0.9.1
More information about the linux-arm-kernel
mailing list