[PATCH] ARM: dts: imx53-qsb-common: fix FEC pinmux config

[Shawn Guo]

On Wed, Jan 25, 2017 at 06:25:48AM +0100, linux-kernel-dev at beckhoff.com wrote:
> From: Patrick Bruenn <p.bruenn at beckhoff.com>
> 
> The pinmux configuration in device tree was different from manual
> muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
> All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the
> bootloader already did the correct pinmuxing for us.
> But recently u-boot is migrating to reuse device tree files from the
> kernel tree, so it seems to be better to have the correct pinmuxing in
> our files, too.
> 
> Signed-off-by: Patrick Bruenn <p.bruenn at beckhoff.com>

Applied, thanks.