[PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality

[Adrian Hunter]

On 27/01/2017 5:12 p.m., Ulf Hansson wrote:
> On 26 January 2017 at 13:39, Adrian Hunter <adrian.hunter at intel.com> wrote:
>> On 26/01/17 12:50, Ulf Hansson wrote:
>>> On 11 January 2017 at 18:19, Gregory CLEMENT
>>> <gregory.clement at free-electrons.com> wrote:
>>>> +                       priv->init_card_type = MMC_TYPE_MMC;
>>>> +                       mmc->caps |= MMC_CAP_NONREMOVABLE;
>>>> +
>>>> +                       /*
>>>> +                        * Force to clear BUS_TEST to
>>>> +                        * skip bus_test_pre and bus_test_post
>>>> +                        */
>>>> +                       mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST;
>>>> +                       mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ |
>>>
>>> This cap is a bit strange. It was added several years ago by Adrian
>>> Hunter, but I am wondering about the reason to why it's needed.
>>>
>>
>> MMC_CAP2_HC_ERASE_SZ relates to EXT-CSD ERASE_GROUP_DEF.
>>
>> I think it was added to enable people to choose whether they wanted a large
>> or small erase granularity.  That probably doesn't matter if the card
>> supports TRIM.
>>
>
> Huh, the erase/trim/discard code in the mmc core is really hairy. :-)
>
> In mmc_calc_max_discard() the following code/comment exists:
>
> /*
>  * Without erase_group_def set, MMC erase timeout depends on clock
>  * frequence which can change.  In that case, the best choice is
>  * just the preferred erase size.
>  */
> if (mmc_card_mmc(card) && !(card->ext_csd.erase_group_def & 1))
>      return card->pref_erase;
>
>
> This makes me wonder.
>
> So, when we haven't enabled the high capacity erase groups in the
> EXT_CSD register (ext_csd.erase_group_def), we will use the pref_erase
> size.
>
> In the other case, as when having MMC_CAP2_HC_ERASE_SZ set (which will
> set ext_csd.erase_group_def),  we will instead  do some calculations
> to find out the max discards.
>
> Are you saying that these calculations doesn't matter much - or are
> you saying that we always want to do them?

No, I was saying that if you have TRIM then TRIM is preferred to ERASE so 
the erase group size does not come into play when discarding, since ERASE 
granularity is erase groups whereas TRIM granularity is sectors.

However ERASE_GROUP_DEF also affects the size of write protect groups.