[PATCH 2/2] PCI: Add quirk entry for NS2 PAXC PCI

[Jon Mason]

The Broadcom Northstar2 SoC has a number of quirks for the PAXC
(internal/fake) PCI bus.  Specifically, the PCI config space is shared
between the root port and the first PF (ie., PF0), and a number of
fields are tied to zero (thus preventing them from being set).  These
cannot be "fixed" in device firmware, so we must fix them with a quirk.

Signed-off-by: Jon Mason <jon.mason at broadcom.com>
---
 drivers/pci/quirks.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1800bef..c5ef20a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2239,6 +2239,27 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM,
 			 PCI_DEVICE_ID_TIGON3_5719,
 			 quirk_brcm_5719_limit_mrrs);
 
+#ifdef CONFIG_PCIE_IPROC_PLATFORM
+static void quirk_paxc_bridge(struct pci_dev *pdev)
+{
+	/* The PCI config space is shared with the PAXC root port and the first
+	 * Ethernet device.  So, we need to workaround this by telling the PCI
+	 * code that the bridge is not an Ethernet device.
+	 */
+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		pdev->class = PCI_CLASS_BRIDGE_PCI << 8;
+
+	/* MPSS is not being set properly (as it is currently 0).  This is
+	 * because that area of the PCI config space is hard coded to zero, and
+	 * is not modifiable by firmware.  Set this to 2 (e.g., 512 byte MPS)
+	 * so that the MPS can be set to the real max value.
+	 */
+	pdev->pcie_mpss = 2;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
+#endif
+
 /* Originally in EDAC sources for i82875P:
  * Intel tells BIOS developers to hide device 6 which
  * configures the overflow device access containing
-- 
2.7.4