[PATCH 1/4] phy: exynos4: Remove duplicated defines of PHY register defines
Krzysztof Kozlowski
krzk at kernel.org
Fri Jan 27 12:05:07 PST 2017
Phy drivers access PMU region through regmap provided by exynos-pmu
driver. However there is no need to duplicate defines for PMU
registers. Instead just use whatever is defined in exynos-regs-pmu.h.
Additionally MIPI PHY registers for Exynos5433 start from the same
address as Exynos4 and Exynos5250 so re-use existing defines.
This reduces number of defines and allows removal of one header file.
Suggested-by: Marek Szyprowski <m.szyprowski at samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
drivers/phy/phy-exynos-mipi-video.c | 12 ++++++------
include/linux/mfd/syscon/exynos4-pmu.h | 21 ---------------------
include/linux/mfd/syscon/exynos5-pmu.h | 3 ---
include/linux/soc/samsung/exynos-regs-pmu.h | 9 ++++++++-
4 files changed, 14 insertions(+), 31 deletions(-)
delete mode 100644 include/linux/mfd/syscon/exynos4-pmu.h
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index 6bee04cc4d53..d7fe1f8c3ac8 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -12,7 +12,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/mfd/syscon/exynos4-pmu.h>
#include <linux/mfd/syscon/exynos5-pmu.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -21,6 +20,7 @@
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
#include <linux/mfd/syscon.h>
enum exynos_mipi_phy_id {
@@ -173,7 +173,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_CSIS0 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = BIT(0),
.resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
@@ -182,7 +182,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_DSIM0 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = BIT(0),
.resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
@@ -191,7 +191,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_CSIS1 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = BIT(1),
.resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
@@ -200,7 +200,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_DSIM1 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = BIT(1),
.resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
@@ -209,7 +209,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_CSIS2 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5433_MIPI_PHY2_CONTROL,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = BIT(0),
.resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON,
diff --git a/include/linux/mfd/syscon/exynos4-pmu.h b/include/linux/mfd/syscon/exynos4-pmu.h
deleted file mode 100644
index 278b1b1549e9..000000000000
--- a/include/linux/mfd/syscon/exynos4-pmu.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2015 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_
-#define _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_
-
-/* Exynos4 PMU register definitions */
-
-/* MIPI_PHYn_CONTROL register offset: n = 0..1 */
-#define EXYNOS4_MIPI_PHY_CONTROL(n) (0x710 + (n) * 4)
-#define EXYNOS4_MIPI_PHY_ENABLE (1 << 0)
-#define EXYNOS4_MIPI_PHY_SRESETN (1 << 1)
-#define EXYNOS4_MIPI_PHY_MRESETN (1 << 2)
-#define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1)
-
-#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_ */
diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
index 0622ae86f9db..02af8dece914 100644
--- a/include/linux/mfd/syscon/exynos5-pmu.h
+++ b/include/linux/mfd/syscon/exynos5-pmu.h
@@ -38,9 +38,6 @@
/* Exynos5433 specific register definitions */
#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728)
-#define EXYNOS5433_MIPI_PHY0_CONTROL (0x710)
-#define EXYNOS5433_MIPI_PHY1_CONTROL (0x714)
-#define EXYNOS5433_MIPI_PHY2_CONTROL (0x718)
#define EXYNOS5_PHY_ENABLE BIT(0)
#define EXYNOS5_MIPI_PHY_S_RESETN BIT(1)
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index 6a6529c96442..637ead0efd36 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2015 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - Power management unit definition
@@ -50,6 +50,13 @@
#define S5P_WAKEUP_MASK 0x0608
#define S5P_WAKEUP_MASK2 0x0614
+/* MIPI_PHYn_CONTROL, valid for Exynos3250, Exynos4, Exynos5250 and Exynos5433 */
+#define EXYNOS4_MIPI_PHY_CONTROL(n) (0x0710 + (n) * 4)
+#define EXYNOS4_MIPI_PHY_ENABLE (1 << 0)
+#define EXYNOS4_MIPI_PHY_SRESETN (1 << 1)
+#define EXYNOS4_MIPI_PHY_MRESETN (1 << 2)
+#define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1)
+
#define S5P_INFORM0 0x0800
#define S5P_INFORM1 0x0804
#define S5P_INFORM5 0x0814
--
2.9.3
More information about the linux-arm-kernel
mailing list