[PATCH 4/9] arm64: dts: r8a7796: Add R-Car Gen3 thermal support
Simon Horman
horms+renesas at verge.net.au
Fri Jan 27 01:14:26 PST 2017
From: Wolfram Sang <wsa+renesas at sang-engineering.com>
Signed-off-by: Hien Dang <hien.dang.eb at renesas.com>
Signed-off-by: Thao Nguyen <thao.nguyen.yb at rvc.renesas.com>
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt at renesas.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
Acked-by: Eduardo Valentin <edubezval at gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 58 ++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index eb446d966621..67aa0e4fde77 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -680,5 +680,63 @@
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
status = "disabled";
};
+
+ tsc: thermal at e6198000 {
+ compatible = "renesas,r8a7796-thermal";
+ reg = <0 0xe6198000 0 0x68>,
+ <0 0xe61a0000 0 0x5c>,
+ <0 0xe61a8000 0 0x5c>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ #thermal-sensor-cells = <1>;
+ status = "okay";
+ };
+
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
};
--
2.7.0.rc3.207.g0ac5344
More information about the linux-arm-kernel
mailing list