[PATCH v2 3/9] clk: sunxi-ng: add support for Allwinner H5 SoC
Icenowy Zheng
icenowy at aosc.xyz
Thu Jan 26 07:48:53 PST 2017
Allwinner H5 is a SoC that features a CCU like H3, but with MMC phase
clocks removed (for new MMC controller) and a new bus gate/reset
imported.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
---
A giant rewrite since v1.
It now do not use a dedicated driver for H5, but altered the CCU driver
of H3 to support H5.
.../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
drivers/clk/sunxi-ng/Kconfig | 6 +-
drivers/clk/sunxi-ng/Makefile | 2 +-
.../sunxi-ng/{ccu-sun8i-h3.c => ccu-sunxi-h3-h5.c} | 179 ++++++++++++++++++---
.../sunxi-ng/{ccu-sun8i-h3.h => ccu-sunxi-h3-h5.h} | 15 +-
include/dt-bindings/clock/sun8i-h3-ccu.h | 146 +----------------
include/dt-bindings/clock/sunxi-h3-h5-ccu.h | 148 +++++++++++++++++
include/dt-bindings/reset/sun8i-h3-ccu.h | 104 +-----------
include/dt-bindings/reset/sunxi-h3-h5-ccu.h | 106 ++++++++++++
9 files changed, 431 insertions(+), 276 deletions(-)
rename drivers/clk/sunxi-ng/{ccu-sun8i-h3.c => ccu-sunxi-h3-h5.c} (80%)
rename drivers/clk/sunxi-ng/{ccu-sun8i-h3.h => ccu-sunxi-h3-h5.h} (82%)
mode change 100644 => 120000 include/dt-bindings/clock/sun8i-h3-ccu.h
create mode 100644 include/dt-bindings/clock/sunxi-h3-h5-ccu.h
mode change 100644 => 120000 include/dt-bindings/reset/sun8i-h3-ccu.h
create mode 100644 include/dt-bindings/reset/sunxi-h3-h5-ccu.h
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index f6032cf63f12..a33a4a5ecffa 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -9,6 +9,7 @@ Required properties :
- "allwinner,sun8i-h3-ccu"
- "allwinner,sun8i-v3s-ccu"
- "allwinner,sun50i-a64-ccu"
+ - "allwinner,sun50i-h5-ccu"
- reg: Must contain the registers base address and length
- clocks: phandle to the oscillators feeding the CCU. Two are needed:
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 71f11cd1647b..bdf18e846731 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -108,8 +108,8 @@ config SUN8I_A33_CCU
select SUNXI_CCU_PHASE
default MACH_SUN8I
-config SUN8I_H3_CCU
- bool "Support for the Allwinner H3 CCU"
+config SUNXI_H3_H5_CCU
+ bool "Support for the Allwinner H3/H5 CCU"
select SUNXI_CCU_DIV
select SUNXI_CCU_NK
select SUNXI_CCU_NKM
@@ -117,7 +117,7 @@ config SUN8I_H3_CCU
select SUNXI_CCU_NM
select SUNXI_CCU_MP
select SUNXI_CCU_PHASE
- default MACH_SUN8I
+ default MACH_SUN8I || (ARM64 && ARCH_SUNXI)
config SUN8I_V3S_CCU
bool "Support for the Allwinner V3s CCU"
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index a8afdf9c7668..cdc3359abbfe 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -23,5 +23,5 @@ obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
-obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
+obj-$(CONFIG_SUNXI_H3_H5_CCU) += ccu-sunxi-h3-h5.o
obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c
similarity index 80%
rename from drivers/clk/sunxi-ng/ccu-sun8i-h3.c
rename to drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c
index a26c8a19fe93..b7b9f85f5c9f 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c
@@ -27,7 +27,7 @@
#include "ccu_nm.h"
#include "ccu_phase.h"
-#include "ccu-sun8i-h3.h"
+#include "ccu-sunxi-h3-h5.h"
static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux",
"osc24M", 0x000,
@@ -47,7 +47,7 @@ static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux",
* We don't have any need for the variable divider for now, so we just
* hardcode it to match with the clock names
*/
-#define SUN8I_H3_PLL_AUDIO_REG 0x008
+#define SUNXI_H3_H5_PLL_AUDIO_REG 0x008
static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
"osc24M", 0x008,
@@ -300,8 +300,10 @@ static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
0x06c, BIT(18), 0);
static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
0x06c, BIT(19), 0);
-static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
+static SUNXI_CCU_GATE(bus_scr0_clk, "bus-scr0", "apb2",
0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_scr1_clk, "bus-scr1", "apb2",
+ 0x06c, BIT(21), 0);
static SUNXI_CCU_GATE(bus_ephy_clk, "bus-ephy", "ahb1",
0x070, BIT(0), 0);
@@ -484,7 +486,7 @@ static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
0x1a0, 0, 3, BIT(31), 0);
-static struct ccu_common *sun8i_h3_ccu_clks[] = {
+static struct ccu_common *sunxi_h3_h5_ccu_clks[] = {
&pll_cpux_clk.common,
&pll_audio_base_clk.common,
&pll_video_clk.common,
@@ -546,7 +548,8 @@ static struct ccu_common *sun8i_h3_ccu_clks[] = {
&bus_uart1_clk.common,
&bus_uart2_clk.common,
&bus_uart3_clk.common,
- &bus_scr_clk.common,
+ &bus_scr0_clk.common,
+ &bus_scr1_clk.common,
&bus_ephy_clk.common,
&bus_dbg_clk.common,
&ths_clk.common,
@@ -677,7 +680,7 @@ static struct clk_hw_onecell_data sun8i_h3_hw_clks = {
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
- [CLK_BUS_SCR] = &bus_scr_clk.common.hw,
+ [CLK_BUS_SCR0] = &bus_scr0_clk.common.hw,
[CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
[CLK_THS] = &ths_clk.common.hw,
@@ -730,7 +733,123 @@ static struct clk_hw_onecell_data sun8i_h3_hw_clks = {
.num = CLK_NUMBER,
};
-static struct ccu_reset_map sun8i_h3_ccu_resets[] = {
+static struct clk_hw_onecell_data sun50i_h5_hw_clks = {
+ .hws = {
+ [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_DE] = &pll_de_clk.common.hw,
+ [CLK_CPUX] = &cpux_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB1] = &ahb1_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_AHB2] = &ahb2_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
+ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
+ [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
+ [CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
+ [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
+ [CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
+ [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
+ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
+ [CLK_BUS_TVE] = &bus_tve_clk.common.hw,
+ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
+ [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
+ [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
+ [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
+ [CLK_BUS_SCR0] = &bus_scr0_clk.common.hw,
+ [CLK_BUS_SCR1] = &bus_scr1_clk.common.hw,
+ [CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_THS] = &ths_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
+ [CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
+ [CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
+ [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_TCON0] = &tcon_clk.common.hw,
+ [CLK_TVE] = &tve_clk.common.hw,
+ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
+ [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_AC_DIG] = &ac_dig_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_GPU] = &gpu_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sunxi_h3_h5_ccu_resets[] = {
[RST_USB_PHY0] = { 0x0cc, BIT(0) },
[RST_USB_PHY1] = { 0x0cc, BIT(1) },
[RST_USB_PHY2] = { 0x0cc, BIT(2) },
@@ -790,27 +909,39 @@ static struct ccu_reset_map sun8i_h3_ccu_resets[] = {
[RST_BUS_UART1] = { 0x2d8, BIT(17) },
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
[RST_BUS_UART3] = { 0x2d8, BIT(19) },
- [RST_BUS_SCR] = { 0x2d8, BIT(20) },
+ [RST_BUS_SCR0] = { 0x2d8, BIT(20) },
+ [RST_BUS_SCR1] = { 0x2d8, BIT(21) },
};
static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {
- .ccu_clks = sun8i_h3_ccu_clks,
- .num_ccu_clks = ARRAY_SIZE(sun8i_h3_ccu_clks),
+ .ccu_clks = sunxi_h3_h5_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sunxi_h3_h5_ccu_clks),
.hw_clks = &sun8i_h3_hw_clks,
- .resets = sun8i_h3_ccu_resets,
- .num_resets = ARRAY_SIZE(sun8i_h3_ccu_resets),
+ .resets = sunxi_h3_h5_ccu_resets,
+ .num_resets = ARRAY_SIZE(sunxi_h3_h5_ccu_resets),
+};
+
+static const struct sunxi_ccu_desc sun50i_h5_ccu_desc = {
+ .ccu_clks = sunxi_h3_h5_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sunxi_h3_h5_ccu_clks),
+
+ .hw_clks = &sun50i_h5_hw_clks,
+
+ .resets = sunxi_h3_h5_ccu_resets,
+ .num_resets = ARRAY_SIZE(sunxi_h3_h5_ccu_resets),
};
-static struct ccu_mux_nb sun8i_h3_cpu_nb = {
+static struct ccu_mux_nb sunxi_h3_h5_cpu_nb = {
.common = &cpux_clk.common,
.cm = &cpux_clk.mux,
.delay_us = 1, /* > 8 clock cycles at 24 MHz */
.bypass_index = 1, /* index of 24 MHz oscillator */
};
-static void __init sun8i_h3_ccu_setup(struct device_node *node)
+static void __init sunxi_h3_h5_ccu_init(struct device_node *node,
+ const struct sunxi_ccu_desc *desc)
{
void __iomem *reg;
u32 val;
@@ -823,14 +954,26 @@ static void __init sun8i_h3_ccu_setup(struct device_node *node)
}
/* Force the PLL-Audio-1x divider to 4 */
- val = readl(reg + SUN8I_H3_PLL_AUDIO_REG);
+ val = readl(reg + SUNXI_H3_H5_PLL_AUDIO_REG);
val &= ~GENMASK(19, 16);
- writel(val | (3 << 16), reg + SUN8I_H3_PLL_AUDIO_REG);
+ writel(val | (3 << 16), reg + SUNXI_H3_H5_PLL_AUDIO_REG);
- sunxi_ccu_probe(node, reg, &sun8i_h3_ccu_desc);
+ sunxi_ccu_probe(node, reg, desc);
ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
- &sun8i_h3_cpu_nb);
+ &sunxi_h3_h5_cpu_nb);
+}
+
+static void __init sun8i_h3_ccu_setup(struct device_node *node)
+{
+ sunxi_h3_h5_ccu_init(node, &sun8i_h3_ccu_desc);
}
CLK_OF_DECLARE(sun8i_h3_ccu, "allwinner,sun8i-h3-ccu",
sun8i_h3_ccu_setup);
+
+static void __init sun50i_h5_ccu_setup(struct device_node *node)
+{
+ sunxi_h3_h5_ccu_init(node, &sun50i_h5_ccu_desc);
+}
+CLK_OF_DECLARE(sun50i_h5_ccu, "allwinner,sun50i-h5-ccu",
+ sun50i_h5_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h
similarity index 82%
rename from drivers/clk/sunxi-ng/ccu-sun8i-h3.h
rename to drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h
index 78be712c7487..e5a78cc66d6b 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h
+++ b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h
@@ -14,11 +14,11 @@
* GNU General Public License for more details.
*/
-#ifndef _CCU_SUN8I_H3_H_
-#define _CCU_SUN8I_H3_H_
+#ifndef _CCU_SUNXI_H3_H5_H_
+#define _CCU_SUNXI_H3_H5_H_
-#include <dt-bindings/clock/sun8i-h3-ccu.h>
-#include <dt-bindings/reset/sun8i-h3-ccu.h>
+#include <dt-bindings/clock/sunxi-h3-h5-ccu.h>
+#include <dt-bindings/reset/sunxi-h3-h5-ccu.h>
#define CLK_PLL_CPUX 0
#define CLK_PLL_AUDIO_BASE 1
@@ -57,6 +57,9 @@
/* And the GPU module clock is exported */
-#define CLK_NUMBER (CLK_GPU + 1)
+/* New clocks imported in H5 */
+/* The SCR1 bus gate is exported */
-#endif /* _CCU_SUN8I_H3_H_ */
+#define CLK_NUMBER (CLK_BUS_SCR1 + 1)
+
+#endif /* _CCU_SUNXI_H3_H5_H_ */
diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h
deleted file mode 100644
index efb7ba2bd515..000000000000
--- a/include/dt-bindings/clock/sun8i-h3-ccu.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright (C) 2016 Maxime Ripard <maxime.ripard at free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_
-#define _DT_BINDINGS_CLK_SUN8I_H3_H_
-
-#define CLK_CPUX 14
-
-#define CLK_BUS_CE 20
-#define CLK_BUS_DMA 21
-#define CLK_BUS_MMC0 22
-#define CLK_BUS_MMC1 23
-#define CLK_BUS_MMC2 24
-#define CLK_BUS_NAND 25
-#define CLK_BUS_DRAM 26
-#define CLK_BUS_EMAC 27
-#define CLK_BUS_TS 28
-#define CLK_BUS_HSTIMER 29
-#define CLK_BUS_SPI0 30
-#define CLK_BUS_SPI1 31
-#define CLK_BUS_OTG 32
-#define CLK_BUS_EHCI0 33
-#define CLK_BUS_EHCI1 34
-#define CLK_BUS_EHCI2 35
-#define CLK_BUS_EHCI3 36
-#define CLK_BUS_OHCI0 37
-#define CLK_BUS_OHCI1 38
-#define CLK_BUS_OHCI2 39
-#define CLK_BUS_OHCI3 40
-#define CLK_BUS_VE 41
-#define CLK_BUS_TCON0 42
-#define CLK_BUS_TCON1 43
-#define CLK_BUS_DEINTERLACE 44
-#define CLK_BUS_CSI 45
-#define CLK_BUS_TVE 46
-#define CLK_BUS_HDMI 47
-#define CLK_BUS_DE 48
-#define CLK_BUS_GPU 49
-#define CLK_BUS_MSGBOX 50
-#define CLK_BUS_SPINLOCK 51
-#define CLK_BUS_CODEC 52
-#define CLK_BUS_SPDIF 53
-#define CLK_BUS_PIO 54
-#define CLK_BUS_THS 55
-#define CLK_BUS_I2S0 56
-#define CLK_BUS_I2S1 57
-#define CLK_BUS_I2S2 58
-#define CLK_BUS_I2C0 59
-#define CLK_BUS_I2C1 60
-#define CLK_BUS_I2C2 61
-#define CLK_BUS_UART0 62
-#define CLK_BUS_UART1 63
-#define CLK_BUS_UART2 64
-#define CLK_BUS_UART3 65
-#define CLK_BUS_SCR 66
-#define CLK_BUS_EPHY 67
-#define CLK_BUS_DBG 68
-
-#define CLK_THS 69
-#define CLK_NAND 70
-#define CLK_MMC0 71
-#define CLK_MMC0_SAMPLE 72
-#define CLK_MMC0_OUTPUT 73
-#define CLK_MMC1 74
-#define CLK_MMC1_SAMPLE 75
-#define CLK_MMC1_OUTPUT 76
-#define CLK_MMC2 77
-#define CLK_MMC2_SAMPLE 78
-#define CLK_MMC2_OUTPUT 79
-#define CLK_TS 80
-#define CLK_CE 81
-#define CLK_SPI0 82
-#define CLK_SPI1 83
-#define CLK_I2S0 84
-#define CLK_I2S1 85
-#define CLK_I2S2 86
-#define CLK_SPDIF 87
-#define CLK_USB_PHY0 88
-#define CLK_USB_PHY1 89
-#define CLK_USB_PHY2 90
-#define CLK_USB_PHY3 91
-#define CLK_USB_OHCI0 92
-#define CLK_USB_OHCI1 93
-#define CLK_USB_OHCI2 94
-#define CLK_USB_OHCI3 95
-
-#define CLK_DRAM_VE 97
-#define CLK_DRAM_CSI 98
-#define CLK_DRAM_DEINTERLACE 99
-#define CLK_DRAM_TS 100
-#define CLK_DE 101
-#define CLK_TCON0 102
-#define CLK_TVE 103
-#define CLK_DEINTERLACE 104
-#define CLK_CSI_MISC 105
-#define CLK_CSI_SCLK 106
-#define CLK_CSI_MCLK 107
-#define CLK_VE 108
-#define CLK_AC_DIG 109
-#define CLK_AVS 110
-#define CLK_HDMI 111
-#define CLK_HDMI_DDC 112
-
-#define CLK_GPU 114
-
-#endif /* _DT_BINDINGS_CLK_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h
new file mode 120000
index 000000000000..ef38232141e4
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-h3-ccu.h
@@ -0,0 +1 @@
+sunxi-h3-h5-ccu.h
\ No newline at end of file
diff --git a/include/dt-bindings/clock/sunxi-h3-h5-ccu.h b/include/dt-bindings/clock/sunxi-h3-h5-ccu.h
new file mode 100644
index 000000000000..4899eacef71d
--- /dev/null
+++ b/include/dt-bindings/clock/sunxi-h3-h5-ccu.h
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUNXI_H3_H5_H_
+#define _DT_BINDINGS_CLK_SUNXI_H3_H5_H_
+
+#define CLK_CPUX 14
+
+#define CLK_BUS_CE 20
+#define CLK_BUS_DMA 21
+#define CLK_BUS_MMC0 22
+#define CLK_BUS_MMC1 23
+#define CLK_BUS_MMC2 24
+#define CLK_BUS_NAND 25
+#define CLK_BUS_DRAM 26
+#define CLK_BUS_EMAC 27
+#define CLK_BUS_TS 28
+#define CLK_BUS_HSTIMER 29
+#define CLK_BUS_SPI0 30
+#define CLK_BUS_SPI1 31
+#define CLK_BUS_OTG 32
+#define CLK_BUS_EHCI0 33
+#define CLK_BUS_EHCI1 34
+#define CLK_BUS_EHCI2 35
+#define CLK_BUS_EHCI3 36
+#define CLK_BUS_OHCI0 37
+#define CLK_BUS_OHCI1 38
+#define CLK_BUS_OHCI2 39
+#define CLK_BUS_OHCI3 40
+#define CLK_BUS_VE 41
+#define CLK_BUS_TCON0 42
+#define CLK_BUS_TCON1 43
+#define CLK_BUS_DEINTERLACE 44
+#define CLK_BUS_CSI 45
+#define CLK_BUS_TVE 46
+#define CLK_BUS_HDMI 47
+#define CLK_BUS_DE 48
+#define CLK_BUS_GPU 49
+#define CLK_BUS_MSGBOX 50
+#define CLK_BUS_SPINLOCK 51
+#define CLK_BUS_CODEC 52
+#define CLK_BUS_SPDIF 53
+#define CLK_BUS_PIO 54
+#define CLK_BUS_THS 55
+#define CLK_BUS_I2S0 56
+#define CLK_BUS_I2S1 57
+#define CLK_BUS_I2S2 58
+#define CLK_BUS_I2C0 59
+#define CLK_BUS_I2C1 60
+#define CLK_BUS_I2C2 61
+#define CLK_BUS_UART0 62
+#define CLK_BUS_UART1 63
+#define CLK_BUS_UART2 64
+#define CLK_BUS_UART3 65
+#define CLK_BUS_SCR0 66
+#define CLK_BUS_EPHY 67
+#define CLK_BUS_DBG 68
+
+#define CLK_THS 69
+#define CLK_NAND 70
+#define CLK_MMC0 71
+#define CLK_MMC0_SAMPLE 72
+#define CLK_MMC0_OUTPUT 73
+#define CLK_MMC1 74
+#define CLK_MMC1_SAMPLE 75
+#define CLK_MMC1_OUTPUT 76
+#define CLK_MMC2 77
+#define CLK_MMC2_SAMPLE 78
+#define CLK_MMC2_OUTPUT 79
+#define CLK_TS 80
+#define CLK_CE 81
+#define CLK_SPI0 82
+#define CLK_SPI1 83
+#define CLK_I2S0 84
+#define CLK_I2S1 85
+#define CLK_I2S2 86
+#define CLK_SPDIF 87
+#define CLK_USB_PHY0 88
+#define CLK_USB_PHY1 89
+#define CLK_USB_PHY2 90
+#define CLK_USB_PHY3 91
+#define CLK_USB_OHCI0 92
+#define CLK_USB_OHCI1 93
+#define CLK_USB_OHCI2 94
+#define CLK_USB_OHCI3 95
+
+#define CLK_DRAM_VE 97
+#define CLK_DRAM_CSI 98
+#define CLK_DRAM_DEINTERLACE 99
+#define CLK_DRAM_TS 100
+#define CLK_DE 101
+#define CLK_TCON0 102
+#define CLK_TVE 103
+#define CLK_DEINTERLACE 104
+#define CLK_CSI_MISC 105
+#define CLK_CSI_SCLK 106
+#define CLK_CSI_MCLK 107
+#define CLK_VE 108
+#define CLK_AC_DIG 109
+#define CLK_AVS 110
+#define CLK_HDMI 111
+#define CLK_HDMI_DDC 112
+
+#define CLK_GPU 114
+
+/* New clocks imported in H5 */
+#define CLK_BUS_SCR1 115
+
+#endif /* _DT_BINDINGS_CLK_SUNXI_H3_H5_H_ */
diff --git a/include/dt-bindings/reset/sun8i-h3-ccu.h b/include/dt-bindings/reset/sun8i-h3-ccu.h
deleted file mode 100644
index 6b7af80c26ec..000000000000
--- a/include/dt-bindings/reset/sun8i-h3-ccu.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (C) 2016 Maxime Ripard <maxime.ripard at free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#ifndef _DT_BINDINGS_RST_SUN8I_H3_H_
-#define _DT_BINDINGS_RST_SUN8I_H3_H_
-
-#define RST_USB_PHY0 0
-#define RST_USB_PHY1 1
-#define RST_USB_PHY2 2
-#define RST_USB_PHY3 3
-
-#define RST_MBUS 4
-
-#define RST_BUS_CE 5
-#define RST_BUS_DMA 6
-#define RST_BUS_MMC0 7
-#define RST_BUS_MMC1 8
-#define RST_BUS_MMC2 9
-#define RST_BUS_NAND 10
-#define RST_BUS_DRAM 11
-#define RST_BUS_EMAC 12
-#define RST_BUS_TS 13
-#define RST_BUS_HSTIMER 14
-#define RST_BUS_SPI0 15
-#define RST_BUS_SPI1 16
-#define RST_BUS_OTG 17
-#define RST_BUS_EHCI0 18
-#define RST_BUS_EHCI1 19
-#define RST_BUS_EHCI2 20
-#define RST_BUS_EHCI3 21
-#define RST_BUS_OHCI0 22
-#define RST_BUS_OHCI1 23
-#define RST_BUS_OHCI2 24
-#define RST_BUS_OHCI3 25
-#define RST_BUS_VE 26
-#define RST_BUS_TCON0 27
-#define RST_BUS_TCON1 28
-#define RST_BUS_DEINTERLACE 29
-#define RST_BUS_CSI 30
-#define RST_BUS_TVE 31
-#define RST_BUS_HDMI0 32
-#define RST_BUS_HDMI1 33
-#define RST_BUS_DE 34
-#define RST_BUS_GPU 35
-#define RST_BUS_MSGBOX 36
-#define RST_BUS_SPINLOCK 37
-#define RST_BUS_DBG 38
-#define RST_BUS_EPHY 39
-#define RST_BUS_CODEC 40
-#define RST_BUS_SPDIF 41
-#define RST_BUS_THS 42
-#define RST_BUS_I2S0 43
-#define RST_BUS_I2S1 44
-#define RST_BUS_I2S2 45
-#define RST_BUS_I2C0 46
-#define RST_BUS_I2C1 47
-#define RST_BUS_I2C2 48
-#define RST_BUS_UART0 49
-#define RST_BUS_UART1 50
-#define RST_BUS_UART2 51
-#define RST_BUS_UART3 52
-#define RST_BUS_SCR 53
-
-#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/reset/sun8i-h3-ccu.h b/include/dt-bindings/reset/sun8i-h3-ccu.h
new file mode 120000
index 000000000000..ef38232141e4
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-h3-ccu.h
@@ -0,0 +1 @@
+sunxi-h3-h5-ccu.h
\ No newline at end of file
diff --git a/include/dt-bindings/reset/sunxi-h3-h5-ccu.h b/include/dt-bindings/reset/sunxi-h3-h5-ccu.h
new file mode 100644
index 000000000000..1084c157c062
--- /dev/null
+++ b/include/dt-bindings/reset/sunxi-h3-h5-ccu.h
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUNXI_H3_H5_H_
+#define _DT_BINDINGS_RST_SUNXI_H3_H5_H_
+
+#define RST_USB_PHY0 0
+#define RST_USB_PHY1 1
+#define RST_USB_PHY2 2
+#define RST_USB_PHY3 3
+
+#define RST_MBUS 4
+
+#define RST_BUS_CE 5
+#define RST_BUS_DMA 6
+#define RST_BUS_MMC0 7
+#define RST_BUS_MMC1 8
+#define RST_BUS_MMC2 9
+#define RST_BUS_NAND 10
+#define RST_BUS_DRAM 11
+#define RST_BUS_EMAC 12
+#define RST_BUS_TS 13
+#define RST_BUS_HSTIMER 14
+#define RST_BUS_SPI0 15
+#define RST_BUS_SPI1 16
+#define RST_BUS_OTG 17
+#define RST_BUS_EHCI0 18
+#define RST_BUS_EHCI1 19
+#define RST_BUS_EHCI2 20
+#define RST_BUS_EHCI3 21
+#define RST_BUS_OHCI0 22
+#define RST_BUS_OHCI1 23
+#define RST_BUS_OHCI2 24
+#define RST_BUS_OHCI3 25
+#define RST_BUS_VE 26
+#define RST_BUS_TCON0 27
+#define RST_BUS_TCON1 28
+#define RST_BUS_DEINTERLACE 29
+#define RST_BUS_CSI 30
+#define RST_BUS_TVE 31
+#define RST_BUS_HDMI0 32
+#define RST_BUS_HDMI1 33
+#define RST_BUS_DE 34
+#define RST_BUS_GPU 35
+#define RST_BUS_MSGBOX 36
+#define RST_BUS_SPINLOCK 37
+#define RST_BUS_DBG 38
+#define RST_BUS_EPHY 39
+#define RST_BUS_CODEC 40
+#define RST_BUS_SPDIF 41
+#define RST_BUS_THS 42
+#define RST_BUS_I2S0 43
+#define RST_BUS_I2S1 44
+#define RST_BUS_I2S2 45
+#define RST_BUS_I2C0 46
+#define RST_BUS_I2C1 47
+#define RST_BUS_I2C2 48
+#define RST_BUS_UART0 49
+#define RST_BUS_UART1 50
+#define RST_BUS_UART2 51
+#define RST_BUS_UART3 52
+#define RST_BUS_SCR0 53
+
+/* New resets imported in H5 */
+#define RST_BUS_SCR1 54
+
+#endif /* _DT_BINDINGS_RST_SUNXI_H3_H5_H_ */
--
2.11.0
More information about the linux-arm-kernel
mailing list