[PATCH 3/7] pinctrl: samsung: Add support for pad retention control for Exynos5433 SoCs

Krzysztof Kozlowski krzk at kernel.org
Wed Jan 25 10:51:52 PST 2017


On Wed, Jan 25, 2017 at 12:50:27PM +0100, Marek Szyprowski wrote:
> This patch adds support for retention control for Exynos5433 SoCs. Three
> groups of pins has been defined for retention control: common shared group
> for ALIVE, CPIF, eSE, FINGER, IMEM, NFC, PERIC, TOUCH pin banks and
> separate control for FSYS and AUD pin banks, for which PMU retention
> registers match whole banks.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> ---
>  drivers/pinctrl/samsung/pinctrl-exynos.c    | 58 +++++++++++++++++++++++++++++
>  include/linux/soc/samsung/exynos-regs-pmu.h | 19 ++++++++++
>  2 files changed, 77 insertions(+)
> 
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
> index fa3802970570..f854c92209e1 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
> @@ -1551,6 +1551,54 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  	EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
>  };
>  
> +/* PMU pin retention groups registers for Exynos5433 (without audio & fsys) */
> +static const u32 exynos5433_retention_regs[] = {
> +	EXYNOS5433_PAD_RETENTION_TOP_OPTION,
> +	EXYNOS5433_PAD_RETENTION_UART_OPTION,
> +	EXYNOS5433_PAD_RETENTION_EBIA_OPTION,
> +	EXYNOS5433_PAD_RETENTION_EBIB_OPTION,
> +	EXYNOS5433_PAD_RETENTION_SPI_OPTION,
> +	EXYNOS5433_PAD_RETENTION_MIF_OPTION,
> +	EXYNOS5433_PAD_RETENTION_USBXTI_OPTION,
> +	EXYNOS5433_PAD_RETENTION_BOOTLDO_OPTION,
> +	EXYNOS5433_PAD_RETENTION_UFS_OPTION,
> +	EXYNOS5433_PAD_RETENTION_FSYSGENIO_OPTION,
> +};
> +
> +static const struct samsung_retention_data exynos5433_retention_data __initconst = {
> +	.regs	 = exynos5433_retention_regs,
> +	.nr_regs = ARRAY_SIZE(exynos5433_retention_regs),
> +	.value	 = PAD_INITIATE_WAKEUP,
> +	.refcnt	 = &exynos_shared_retention_refcnt,
> +	.init	 = exynos_retention_init,
> +};
> +
> +/* PMU retention control for audio pins can be tied to audio pin bank */
> +static const u32 exynos5433_audio_retention_regs[] = {
> +	EXYNOS5433_PAD_RETENTION_AUD_OPTION,
> +};
> +
> +static const struct samsung_retention_data exynos5433_audio_retention_data __initconst = {
> +	.regs	 = exynos5433_audio_retention_regs,
> +	.nr_regs = ARRAY_SIZE(exynos5433_audio_retention_regs),
> +	.value	 = PAD_INITIATE_WAKEUP,
> +	.init	 = exynos_retention_init,
> +};
> +
> +/* PMU retention control for mmc pins can be tied to fsys pin bank */
> +static const u32 exynos5433_fsys_retention_regs[] = {
> +	EXYNOS5433_PAD_RETENTION_MMC0_OPTION,
> +	EXYNOS5433_PAD_RETENTION_MMC1_OPTION,
> +	EXYNOS5433_PAD_RETENTION_MMC2_OPTION,
> +};
> +
> +static const struct samsung_retention_data exynos5433_fsys_retention_data __initconst = {
> +	.regs	 = exynos5433_fsys_retention_regs,
> +	.nr_regs = ARRAY_SIZE(exynos5433_fsys_retention_regs),
> +	.value	 = PAD_INITIATE_WAKEUP,
> +	.init	 = exynos_retention_init,
> +};
> +
>  /*
>   * Samsung pinctrl driver data for Exynos5433 SoC. Exynos5433 SoC includes
>   * ten gpio/pin-mux/pinconfig controllers.
> @@ -1564,6 +1612,7 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
>  		.nr_ext_resources = 1,
> +		.retention_data	= &exynos5433_retention_data,
>  	}, {
>  		/* pin-controller instance 1 data */
>  		.pin_banks	= exynos5433_pin_banks1,
> @@ -1571,6 +1620,7 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  		.eint_gpio_init = exynos_eint_gpio_init,
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
> +		.retention_data	= &exynos5433_audio_retention_data,
>  	}, {
>  		/* pin-controller instance 2 data */
>  		.pin_banks	= exynos5433_pin_banks2,
> @@ -1578,6 +1628,7 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  		.eint_gpio_init = exynos_eint_gpio_init,
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
> +		.retention_data	= &exynos5433_retention_data,
>  	}, {
>  		/* pin-controller instance 3 data */
>  		.pin_banks	= exynos5433_pin_banks3,
> @@ -1585,6 +1636,7 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  		.eint_gpio_init = exynos_eint_gpio_init,
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
> +		.retention_data	= &exynos5433_retention_data,
>  	}, {
>  		/* pin-controller instance 4 data */
>  		.pin_banks	= exynos5433_pin_banks4,
> @@ -1592,6 +1644,7 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  		.eint_gpio_init = exynos_eint_gpio_init,
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
> +		.retention_data	= &exynos5433_retention_data,
>  	}, {
>  		/* pin-controller instance 5 data */
>  		.pin_banks	= exynos5433_pin_banks5,
> @@ -1599,6 +1652,7 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  		.eint_gpio_init = exynos_eint_gpio_init,
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
> +		.retention_data	= &exynos5433_fsys_retention_data,
>  	}, {
>  		/* pin-controller instance 6 data */
>  		.pin_banks	= exynos5433_pin_banks6,
> @@ -1606,6 +1660,7 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  		.eint_gpio_init = exynos_eint_gpio_init,
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
> +		.retention_data	= &exynos5433_retention_data,
>  	}, {
>  		/* pin-controller instance 7 data */
>  		.pin_banks	= exynos5433_pin_banks7,
> @@ -1613,6 +1668,7 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  		.eint_gpio_init = exynos_eint_gpio_init,
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
> +		.retention_data	= &exynos5433_retention_data,
>  	}, {
>  		/* pin-controller instance 8 data */
>  		.pin_banks	= exynos5433_pin_banks8,
> @@ -1620,6 +1676,7 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  		.eint_gpio_init = exynos_eint_gpio_init,
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
> +		.retention_data	= &exynos5433_retention_data,
>  	}, {
>  		/* pin-controller instance 9 data */
>  		.pin_banks	= exynos5433_pin_banks9,
> @@ -1627,6 +1684,7 @@ static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
>  		.eint_gpio_init = exynos_eint_gpio_init,
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
> +		.retention_data	= &exynos5433_retention_data,
>  	},
>  };
>  
> diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
> index d30186e2b609..6a160e2ef4f0 100644
> --- a/include/linux/soc/samsung/exynos-regs-pmu.h
> +++ b/include/linux/soc/samsung/exynos-regs-pmu.h
> @@ -690,4 +690,23 @@
>  					 | EXYNOS5420_KFC_USE_STANDBY_WFI2  \
>  					 | EXYNOS5420_KFC_USE_STANDBY_WFI3)
>  
> +/* For EXYNOS5433 */
> +#define EXYNOS5433_PAD_RETENTION_AUD_OPTION			(0x3028)
> +#define EXYNOS5433_PAD_RETENTION_MMC2_OPTION			(0x30C8)
> +#define EXYNOS5433_PAD_RETENTION_TOP_OPTION			(0x3108)
> +#define EXYNOS5433_PAD_RETENTION_UART_OPTION			(0x3128)
> +#define EXYNOS5433_PAD_RETENTION_MMC0_OPTION			(0x3148)
> +#define EXYNOS5433_PAD_RETENTION_MMC1_OPTION			(0x3168)
> +#define EXYNOS5433_PAD_RETENTION_EBIA_OPTION			(0x3188)
> +#define EXYNOS5433_PAD_RETENTION_EBIB_OPTION			(0x31A8)
> +#define EXYNOS5433_PAD_RETENTION_SPI_OPTION			(0x31C8)
> +#define EXYNOS5433_PAD_RETENTION_MIF_OPTION			(0x31E8)
> +#define EXYNOS5433_PAD_RETENTION_USBXTI_OPTION			(0x3228)
> +#define EXYNOS5433_PAD_RETENTION_BOOTLDO_OPTION			(0x3248)
> +#define EXYNOS5433_PAD_RETENTION_UFS_OPTION			(0x3268)
> +#define EXYNOS5433_PAD_RETENTION_FSYSGENIO_OPTION		(0x32A8)
> +
> +/* EXYNOS5433_PAD_RETENTION_*_OPTION */
> +#define PAD_INITIATE_WAKEUP					(0x1 << 28)

Use existing EXYNOS_WAKEUP_FROM_LOWPWR unless there is a reason not to
use it?

Best regards,
Krzysztof



More information about the linux-arm-kernel mailing list