[patch] {1620} net: hns3: add dcb cap flag in init sequence

[Yankejian (Hackim Yim)]

it is misoperation, please ignore. sorry to interrupt you!


On 2017/1/25 15:26, Kejian Yan wrote:
> If enable DCB feature, we need to add the capacity, and the current
> procedure cannot setting the dcb because of no capacity flag and every
> ops interface will implement by the capicity flag is enable.
>
> Signed-off-by: Kejian Yan <yankejian at huawei.com>
> ---
>  drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 ++++--
>  drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c   | 5 +++++
>  2 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
> index 26b9b46..fffe781 100644
> --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
> +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
> @@ -314,12 +314,14 @@ static int hclge_configure(struct hclge_dev *hdev)
>  		hdev->tx_sch_mode = HCLGE_FLAG_TC_BASE_SCH_MODE;
>  #ifdef CONFIG_HNS3_DCB
>  		hdev->dcbx_cap = DCB_CAP_DCBX_VER_CEE |
> -			DCB_CAP_DCBX_VER_IEEE;
> +			DCB_CAP_DCBX_VER_IEEE | DCB_CAP_DCBX_HOST;
> +		hdev->flag |= HCLGE_FLAG_DCB_CAPABLE;
>  #endif /* #ifdef CONFIG_HNS3_DCB */
>  	} else {
>  		hdev->tx_sch_mode = HCLGE_FLAG_VNET_BASE_SCH_MODE;
>  #ifdef CONFIG_HNS3_DCB
> -		hdev->dcbx_cap = DCB_CAP_DCBX_VER_IEEE;
> +		hdev->dcbx_cap = DCB_CAP_DCBX_VER_IEEE | DCB_CAP_DCBX_HOST;
> +		hdev->flag |= HCLGE_FLAG_DCB_CAPABLE;
>  #endif /* #ifdef CONFIG_HNS3_DCB */
>  	}
>  
> diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
> index 903c413..6b00982 100644
> --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
> +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
> @@ -687,6 +687,11 @@ static void hclge_tm_tc_info_init(struct hclge_dev *hdev)
>  	hdev->dcb_info_tmp.num_tc = hdev->dcb_info.num_tc;
>  	memcpy(hdev->dcb_info_tmp.tc_info, hdev->dcb_info.tc_info,
>  	       HNAE3_MAX_TC * sizeof(*hdev->dcb_info.tc_info));
> +
> +	if (hdev->dcb_info.num_tc > 1)
> +		hdev->flag |= HCLGE_FLAG_DCB_ENABLE;
> +	else
> +		hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE;
>  }
>  
>  static void hclge_tm_pg_info_init(struct hclge_dev *hdev)


-- 
MBR,
Yankejian (Hackim Yim)