[PATCH 11/11] ARM: dts: sun9i: Switch to new clock bindings
Chen-Yu Tsai
wens at csie.org
Mon Jan 23 18:32:30 PST 2017
Now that we have a full clock driver for sun9i, switch to it.
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 404 +++++++++++----------------------------
1 file changed, 107 insertions(+), 297 deletions(-)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 18b35fc23f46..b763c61cacba 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -46,6 +46,13 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun9i-a80-ccu.h>
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/clock/sun9i-a80-usb.h>
+#include <dt-bindings/reset/sun9i-a80-ccu.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-usb.h>
+
/ {
interrupt-parent = <&gic>;
@@ -157,228 +164,13 @@
clock-output-names = "osc32k";
};
- usb_mod_clk: clk at 00a08000 {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun9i-a80-usb-mod-clk";
- reg = <0x00a08000 0x4>;
- clocks = <&ahb1_gates 1>;
- clock-output-names = "usb0_ahb", "usb_ohci0",
- "usb1_ahb", "usb_ohci1",
- "usb2_ahb", "usb_ohci2";
- };
-
- usb_phy_clk: clk at 00a08004 {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun9i-a80-usb-phy-clk";
- reg = <0x00a08004 0x4>;
- clocks = <&ahb1_gates 1>;
- clock-output-names = "usb_phy0", "usb_hsic1_480M",
- "usb_phy1", "usb_hsic2_480M",
- "usb_phy2", "usb_hsic_12M";
- };
-
- pll3: clk at 06000008 {
- /* placeholder until implemented */
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-rate = <0>;
- clock-output-names = "pll3";
- };
-
- pll4: clk at 0600000c {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-pll4-clk";
- reg = <0x0600000c 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll12: clk at 0600002c {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-pll4-clk";
- reg = <0x0600002c 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll12";
- };
-
- gt_clk: clk at 0600005c {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-gt-clk";
- reg = <0x0600005c 0x4>;
- clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
- clock-output-names = "gt";
- };
-
- ahb0: clk at 06000060 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-ahb-clk";
- reg = <0x06000060 0x4>;
- clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>;
- clock-output-names = "ahb0";
- };
-
- ahb1: clk at 06000064 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-ahb-clk";
- reg = <0x06000064 0x4>;
- clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>;
- clock-output-names = "ahb1";
- };
-
- ahb2: clk at 06000068 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-ahb-clk";
- reg = <0x06000068 0x4>;
- clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>;
- clock-output-names = "ahb2";
- };
-
- apb0: clk at 06000070 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-apb0-clk";
- reg = <0x06000070 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "apb0";
- };
-
- apb1: clk at 06000074 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-apb1-clk";
- reg = <0x06000074 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "apb1";
- };
-
- cci400_clk: clk at 06000078 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-gt-clk";
- reg = <0x06000078 0x4>;
- clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
- clock-output-names = "cci400";
- };
-
- mmc0_clk: clk at 06000410 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-mmc-clk";
- reg = <0x06000410 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "mmc0", "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk at 06000414 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-mmc-clk";
- reg = <0x06000414 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "mmc1", "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk at 06000418 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-mmc-clk";
- reg = <0x06000418 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "mmc2", "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk at 0600041c {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-mmc-clk";
- reg = <0x0600041c 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "mmc3", "mmc3_output",
- "mmc3_sample";
- };
-
- ahb0_gates: clk at 06000580 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
- reg = <0x06000580 0x4>;
- clocks = <&ahb0>;
- clock-indices = <0>, <1>, <3>,
- <5>, <8>, <12>,
- <13>, <14>,
- <15>, <16>, <18>,
- <20>, <21>, <22>,
- <23>;
- clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
- "ahb0_ss", "ahb0_sd", "ahb0_nand1",
- "ahb0_nand0", "ahb0_sdram",
- "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
- "ahb0_spi0", "ahb0_spi1", "ahb0_spi2",
- "ahb0_spi3";
- };
-
- ahb1_gates: clk at 06000584 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
- reg = <0x06000584 0x4>;
- clocks = <&ahb1>;
- clock-indices = <0>, <1>,
- <17>, <21>,
- <22>, <23>,
- <24>;
- clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
- "ahb1_gmac", "ahb1_msgbox",
- "ahb1_spinlock", "ahb1_hstimer",
- "ahb1_dma";
- };
-
- ahb2_gates: clk at 06000588 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
- reg = <0x06000588 0x4>;
- clocks = <&ahb2>;
- clock-indices = <0>, <1>,
- <2>, <4>, <5>,
- <7>, <8>, <11>;
- clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
- "ahb2_edp", "ahb2_csi", "ahb2_hdmi",
- "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
- };
-
- apb0_gates: clk at 06000590 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-apb0-gates-clk";
- reg = <0x06000590 0x4>;
- clocks = <&apb0>;
- clock-indices = <1>, <5>,
- <11>, <12>, <13>,
- <15>, <17>, <18>,
- <19>;
- clock-output-names = "apb0_spdif", "apb0_pio",
- "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
- "apb0_lradc", "apb0_gpadc", "apb0_twd",
- "apb0_cirtx";
- };
-
- apb1_gates: clk at 06000594 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-apb1-gates-clk";
- reg = <0x06000594 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <16>, <17>,
- <18>, <19>,
- <20>, <21>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
- "apb1_uart0", "apb1_uart1",
- "apb1_uart2", "apb1_uart3",
- "apb1_uart4", "apb1_uart5";
- };
-
cpus_clk: clk at 08001410 {
compatible = "allwinner,sun9i-a80-cpus-clk";
reg = <0x08001410 0x4>;
#clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+ clocks = <&osc32k>, <&osc24M>,
+ <&ccu CLK_PLL_PERIPH0>,
+ <&ccu CLK_PLL_AUDIO>;
clock-output-names = "cpus";
};
@@ -451,8 +243,8 @@
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a00000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_mod_clk 1>;
- resets = <&usb_mod_clk 17>;
+ clocks = <&usb_clocks CLK_BUS_HCI0>;
+ resets = <&usb_clocks RST_USB0_HCI>;
phys = <&usbphy1>;
phy-names = "usb";
status = "disabled";
@@ -462,8 +254,9 @@
compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
reg = <0x00a00400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
- resets = <&usb_mod_clk 17>;
+ clocks = <&usb_clocks CLK_BUS_HCI0>,
+ <&usb_clocks CLK_USB_OHCI0>;
+ resets = <&usb_clocks RST_USB0_HCI>;
phys = <&usbphy1>;
phy-names = "usb";
status = "disabled";
@@ -472,9 +265,9 @@
usbphy1: phy at 00a00800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a00800 0x4>;
- clocks = <&usb_phy_clk 1>;
+ clocks = <&usb_clocks CLK_USB0_PHY>;
clock-names = "phy";
- resets = <&usb_phy_clk 17>;
+ resets = <&usb_clocks RST_USB0_PHY>;
reset-names = "phy";
status = "disabled";
#phy-cells = <0>;
@@ -484,8 +277,8 @@
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a01000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_mod_clk 3>;
- resets = <&usb_mod_clk 18>;
+ clocks = <&usb_clocks CLK_BUS_HCI1>;
+ resets = <&usb_clocks RST_USB1_HCI>;
phys = <&usbphy2>;
phy-names = "usb";
status = "disabled";
@@ -494,11 +287,16 @@
usbphy2: phy at 00a01800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a01800 0x4>;
- clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
- <&usb_phy_clk 3>;
- clock-names = "hsic_480M", "hsic_12M", "phy";
- resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
- reset-names = "hsic", "phy";
+ clocks = <&usb_clocks CLK_USB1_HSIC>,
+ <&usb_clocks CLK_USB_HSIC>,
+ <&usb_clocks CLK_USB1_PHY>;
+ clock-names = "hsic_480M",
+ "hsic_12M",
+ "phy";
+ resets = <&usb_clocks RST_USB1_HSIC>,
+ <&usb_clocks RST_USB1_PHY>;
+ reset-names = "hsic",
+ "phy";
status = "disabled";
#phy-cells = <0>;
/* usb1 is always used with HSIC */
@@ -509,8 +307,8 @@
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a02000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_mod_clk 5>;
- resets = <&usb_mod_clk 19>;
+ clocks = <&usb_clocks CLK_BUS_HCI2>;
+ resets = <&usb_clocks RST_USB2_HCI>;
phys = <&usbphy3>;
phy-names = "usb";
status = "disabled";
@@ -520,8 +318,9 @@
compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
reg = <0x00a02400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>;
- resets = <&usb_mod_clk 19>;
+ clocks = <&usb_clocks CLK_BUS_HCI2>,
+ <&usb_clocks CLK_USB_OHCI2>;
+ resets = <&usb_clocks RST_USB2_HCI>;
phys = <&usbphy3>;
phy-names = "usb";
status = "disabled";
@@ -530,20 +329,35 @@
usbphy3: phy at 00a02800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a02800 0x4>;
- clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
- <&usb_phy_clk 5>;
- clock-names = "hsic_480M", "hsic_12M", "phy";
- resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
- reset-names = "hsic", "phy";
+ clocks = <&usb_clocks CLK_USB2_HSIC>,
+ <&usb_clocks CLK_USB_HSIC>,
+ <&usb_clocks CLK_USB2_PHY>;
+ clock-names = "hsic_480M",
+ "hsic_12M",
+ "phy";
+ resets = <&usb_clocks RST_USB2_HSIC>,
+ <&usb_clocks RST_USB2_PHY>;
+ reset-names = "hsic",
+ "phy";
status = "disabled";
#phy-cells = <0>;
};
+ usb_clocks: clock at 00a08000 {
+ compatible = "allwinner,sun9i-a80-usb-clks";
+ reg = <0x00a08000 0x8>;
+ clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+ clock-names = "bus", "hosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
mmc0: mmc at 01c0f000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
- <&mmc0_clk 1>, <&mmc0_clk 2>;
+ clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 0>;
reset-names = "ahb";
@@ -556,8 +370,9 @@
mmc1: mmc at 01c10000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
- <&mmc1_clk 1>, <&mmc1_clk 2>;
+ clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 1>;
reset-names = "ahb";
@@ -570,8 +385,9 @@
mmc2: mmc at 01c11000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
- <&mmc2_clk 1>, <&mmc2_clk 2>;
+ clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 2>;
reset-names = "ahb";
@@ -584,8 +400,9 @@
mmc3: mmc at 01c12000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
- <&mmc3_clk 1>, <&mmc3_clk 2>;
+ clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
+ <&ccu CLK_MMC3_OUTPUT>,
+ <&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 3>;
reset-names = "ahb";
@@ -598,9 +415,9 @@
mmc_config_clk: clk at 01c13000 {
compatible = "allwinner,sun9i-a80-mmc-config-clk";
reg = <0x01c13000 0x10>;
- clocks = <&ahb0_gates 8>;
+ clocks = <&ccu CLK_BUS_MMC>;
clock-names = "ahb";
- resets = <&ahb0_resets 8>;
+ resets = <&ccu RST_BUS_MMC>;
reset-names = "ahb";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -619,34 +436,27 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- ahb0_resets: reset at 060005a0 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x060005a0 0x4>;
- };
-
- ahb1_resets: reset at 060005a4 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x060005a4 0x4>;
- };
-
- ahb2_resets: reset at 060005a8 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x060005a8 0x4>;
- };
-
- apb0_resets: reset at 060005b0 {
+ de_clocks: clock at 03000000 {
+ compatible = "allwinner,sun9i-a80-de-clks";
+ reg = <0x03000000 0x30>;
+ clocks = <&ccu CLK_DE>,
+ <&ccu CLK_SDRAM>,
+ <&ccu CLK_BUS_DE>;
+ clock-names = "mod",
+ "dram",
+ "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
#reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x060005b0 0x4>;
};
- apb1_resets: reset at 060005b4 {
+ ccu: clock at 06000000 {
+ compatible = "allwinner,sun9i-a80-ccu";
+ reg = <0x06000000 0x800>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
#reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x060005b4 0x4>;
};
timer at 06000c00 {
@@ -676,7 +486,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -732,8 +542,8 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
- resets = <&apb1_resets 16>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@@ -743,8 +553,8 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
- resets = <&apb1_resets 17>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@@ -754,8 +564,8 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
- resets = <&apb1_resets 18>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
@@ -765,8 +575,8 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
- resets = <&apb1_resets 19>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
@@ -776,8 +586,8 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
- resets = <&apb1_resets 20>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
status = "disabled";
};
@@ -787,8 +597,8 @@
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
- resets = <&apb1_resets 21>;
+ clocks = <&ccu CLK_BUS_UART5>;
+ resets = <&ccu RST_BUS_UART5>;
status = "disabled";
};
@@ -796,8 +606,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002800 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 0>;
- resets = <&apb1_resets 0>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -807,8 +617,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002c00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 1>;
- resets = <&apb1_resets 1>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -818,8 +628,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 2>;
- resets = <&apb1_resets 2>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -829,8 +639,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 3>;
- resets = <&apb1_resets 3>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -840,8 +650,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003800 0x400>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 4>;
- resets = <&apb1_resets 4>;
+ clocks = <&ccu CLK_BUS_I2C4>;
+ resets = <&ccu RST_BUS_I2C4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
--
2.11.0
More information about the linux-arm-kernel
mailing list