[PATCH v4 0/9] meson-gx: reset RGMII PHYs and configure TX delay

[Kevin Hilman]

Martin Blumenstingl <martin.blumenstingl at googlemail.com> writes:

> This series adds the reset GPIOs for the (external) ethernet PHYs on all
> GXBB boards.
> Additionally it provides a ethernet PHY node which can be used to specify
> PHY-specific properties (this may be required if more boards require the
> "eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board .dts
> consistent I chose to add the PHY node also for boards which don't have a
> RTL8211F PHY.
>
> Patch #7 from this series also removes ethernet support for the P200

I think you mean P201 here, right?

Kevin