[PATCH v6 2/3] dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdma
Mike Looijmans
mike.looijmans at topic.nl
Sun Jan 22 23:26:09 PST 2017
On 14-01-17 06:35, Kedareswara rao Appana wrote:
> When VDMA is configured for more than one frame in the h/w.
> For example h/w is configured for n number of frames, user
> Submits n number of frames and triggered the DMA using issue_pending API.
>
> In the current driver flow we are submitting one frame at a time,
> But we should submit all the n number of frames at one time
> As the h/w is configured for n number of frames.
The hardware can always handle a single frame submission, by using the "park"
bit. This would make a good "cyclic" implementation too (using vdma as
framebuffer).
It could also handle all cases for "k" frames where n%k==0 (n is a multiple of
k) by simply replicating the frame pointers.
>
> This patch fixes this issue.
>
> Acked-by: Rob Herring <robh at kernel.org>
> Reviewed-by: Jose Abreu <joabreu at synopsys.com>
> Signed-off-by: Kedareswara rao Appana <appanad at xilinx.com>
> ---
> Changes for v6:
> ---> Added Rob Acked-by
> ---> Updated commit message as suggested by Vinod.
> Changes for v5:
> ---> Updated xlnx,fstore-config property to xlnx,fstore-enable
> and updated description as suggested by Rob.
> Changes for v4:
> ---> Add Check for framestore configuration on Transmit case as well
> as suggested by Jose Abreu.
> ---> Modified the dev_dbg checks to dev_warn checks as suggested
> by Jose Abreu.
> Changes for v3:
> ---> Added Checks for frame store configuration. If frame store
> Configuration is not present at the h/w level and user
> Submits less frames added debug prints in the driver as relevant.
> Changes for v2:
> ---> Fixed race conditions in the driver as suggested by Jose Abreu
> ---> Fixed unnecessray if else checks in the vdma_start_transfer
> as suggested by Laurent Pinchart.
>
> .../devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 +
> drivers/dma/xilinx/xilinx_dma.c | 78 +++++++++++++++-------
> 2 files changed, 57 insertions(+), 23 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
> index a2b8bfa..e951c09 100644
> --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
> +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
> @@ -66,6 +66,8 @@ Optional child node properties:
> Optional child node properties for VDMA:
> - xlnx,genlock-mode: Tells Genlock synchronization is
> enabled/disabled in hardware.
> +- xlnx,fstore-enable: boolean; if defined, it indicates that controller
> + supports frame store configuration.
> Optional child node properties for AXI DMA:
> -dma-channels: Number of dma channels in child node.
>
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index 5eeea57..edb5b71 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -322,6 +322,7 @@ struct xilinx_dma_tx_descriptor {
> * @genlock: Support genlock mode
> * @err: Channel has errors
> * @idle: Check for channel idle
> + * @has_fstoreen: Check for frame store configuration
> * @tasklet: Cleanup work after irq
> * @config: Device configuration info
> * @flush_on_fsync: Flush on Frame sync
> @@ -353,6 +354,7 @@ struct xilinx_dma_chan {
> bool genlock;
> bool err;
> bool idle;
> + bool has_fstoreen;
> struct tasklet_struct tasklet;
> struct xilinx_vdma_config config;
> bool flush_on_fsync;
> @@ -990,6 +992,27 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
> if (list_empty(&chan->pending_list))
> return;
>
> + /*
> + * Note: When VDMA is built with default h/w configuration
> + * User should submit frames upto H/W configured.
> + * If users submits less than h/w configured
> + * VDMA engine tries to write to a invalid location
> + * Results undefined behaviour/memory corruption.
> + *
> + * If user would like to submit frames less than h/w capable
> + * On S2MM side please enable debug info 13 at the h/w level
> + * On MM2S side please enable debug info 6 at the h/w level
> + * It will allows the frame buffers numbers to be modified at runtime.
> + */
> + if (!chan->has_fstoreen &&
> + chan->desc_pendingcount < chan->num_frms) {
> + dev_warn(chan->dev, "Frame Store Configuration is not enabled at the\n");
> + dev_warn(chan->dev, "H/w level enable Debug info 13 or 6 at the h/w level\n");
> + dev_warn(chan->dev, "OR Submit the frames upto h/w Capable\n\r");
> +
> + return;
> + }
> +
> desc = list_first_entry(&chan->pending_list,
> struct xilinx_dma_tx_descriptor, node);
> tail_desc = list_last_entry(&chan->pending_list,
> @@ -1052,25 +1075,38 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
> if (chan->has_sg) {
> dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
> tail_segment->phys);
> + list_splice_tail_init(&chan->pending_list, &chan->active_list);
> + chan->desc_pendingcount = 0;
> } else {
> struct xilinx_vdma_tx_segment *segment, *last = NULL;
> - int i = 0;
> + int i = 0, j = 0;
>
> if (chan->desc_submitcount < chan->num_frms)
> i = chan->desc_submitcount;
>
> - list_for_each_entry(segment, &desc->segments, node) {
> - if (chan->ext_addr)
> - vdma_desc_write_64(chan,
> - XILINX_VDMA_REG_START_ADDRESS_64(i++),
> - segment->hw.buf_addr,
> - segment->hw.buf_addr_msb);
> - else
> - vdma_desc_write(chan,
> - XILINX_VDMA_REG_START_ADDRESS(i++),
> - segment->hw.buf_addr);
> -
> - last = segment;
> + for (j = 0; j < chan->num_frms; ) {
> + list_for_each_entry(segment, &desc->segments, node) {
> + if (chan->ext_addr)
> + vdma_desc_write_64(chan,
> + XILINX_VDMA_REG_START_ADDRESS_64(i++),
> + segment->hw.buf_addr,
> + segment->hw.buf_addr_msb);
> + else
> + vdma_desc_write(chan,
> + XILINX_VDMA_REG_START_ADDRESS(i++),
> + segment->hw.buf_addr);
> +
> + last = segment;
> + }
> + list_del(&desc->node);
> + list_add_tail(&desc->node, &chan->active_list);
> + j++;
> + if (list_empty(&chan->pending_list) ||
> + (i == chan->num_frms))
> + break;
> + desc = list_first_entry(&chan->pending_list,
> + struct xilinx_dma_tx_descriptor,
> + node);
> }
>
> if (!last)
> @@ -1081,20 +1117,14 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
> vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
> last->hw.stride);
> vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
> - }
>
> - chan->idle = false;
> - if (!chan->has_sg) {
> - list_del(&desc->node);
> - list_add_tail(&desc->node, &chan->active_list);
> - chan->desc_submitcount++;
> - chan->desc_pendingcount--;
> + chan->desc_submitcount += j;
> + chan->desc_pendingcount -= j;
> if (chan->desc_submitcount == chan->num_frms)
> chan->desc_submitcount = 0;
> - } else {
> - list_splice_tail_init(&chan->pending_list, &chan->active_list);
> - chan->desc_pendingcount = 0;
> }
> +
> + chan->idle = false;
> }
>
> /**
> @@ -1342,6 +1372,7 @@ static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
>
> chan->err = false;
> chan->idle = true;
> + chan->desc_submitcount = 0;
>
> return err;
> }
> @@ -2320,6 +2351,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
> has_dre = of_property_read_bool(node, "xlnx,include-dre");
>
> chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
> + chan->has_fstoreen = of_property_read_bool(node, "xlnx,fstore-enable");
>
> err = of_property_read_u32(node, "xlnx,datawidth", &value);
> if (err) {
>
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijmans at topicproducts.com
Website: www.topicproducts.com
Please consider the environment before printing this e-mail
More information about the linux-arm-kernel
mailing list