[PATCH v2 15/26] drm/rockchip: dw-mipi-dsi: ensure PHY is reset

[Chris Zhong]

Reviewed-by: Chris Zhong <zyw at rock-chips.com>

On 01/22/2017 12:31 AM, John Keeping wrote:
> Also don't power up the DSI host at this point since this is not
> necessary in order to configure the PHY and we do so later when
> selecting video or command mode.
>
> Signed-off-by: John Keeping <john at metanate.com>
> ---
> Unchanged in v2
> ---
>   drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index c2e0ba96e0a0..5b3068e9e8db 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -397,7 +397,10 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
>   		return testdin;
>   	}
>   
> -	dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +	/* Start by clearing PHY state */
> +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
> +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
> +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
>   
>   	dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
>   					 VCO_RANGE_CON_SEL(vco) |