[PATCH v4 1/8] clk: sunxi-ng: multiplier: Add fractional support
Maxime Ripard
maxime.ripard at free-electrons.com
Sat Jan 21 14:50:50 PST 2017
Some clocks on the earlier SoCs such as the video PLLs are multipliers with
fractional settings.
Support those cases.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Acked-by: Chen-Yu Tsai <wens at csie.org>
---
drivers/clk/sunxi-ng/ccu_mult.c | 8 ++++++++
drivers/clk/sunxi-ng/ccu_mult.h | 2 ++
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c
index 678b6cb49f01..826302464650 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.c
+++ b/drivers/clk/sunxi-ng/ccu_mult.c
@@ -75,6 +75,9 @@ static unsigned long ccu_mult_recalc_rate(struct clk_hw *hw,
unsigned long val;
u32 reg;
+ if (ccu_frac_helper_is_enabled(&cm->common, &cm->frac))
+ return ccu_frac_helper_read_rate(&cm->common, &cm->frac);
+
reg = readl(cm->common.base + cm->common.reg);
val = reg >> cm->mult.shift;
val &= (1 << cm->mult.width) - 1;
@@ -102,6 +105,11 @@ static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long flags;
u32 reg;
+ if (ccu_frac_helper_has_rate(&cm->common, &cm->frac, rate))
+ return ccu_frac_helper_set_rate(&cm->common, &cm->frac, rate);
+ else
+ ccu_frac_helper_disable(&cm->common, &cm->frac);
+
ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
&parent_rate);
diff --git a/drivers/clk/sunxi-ng/ccu_mult.h b/drivers/clk/sunxi-ng/ccu_mult.h
index c1a2134bdc71..bd2e38b5a32a 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.h
+++ b/drivers/clk/sunxi-ng/ccu_mult.h
@@ -2,6 +2,7 @@
#define _CCU_MULT_H_
#include "ccu_common.h"
+#include "ccu_frac.h"
#include "ccu_mux.h"
struct ccu_mult_internal {
@@ -23,6 +24,7 @@ struct ccu_mult_internal {
struct ccu_mult {
u32 enable;
+ struct ccu_frac_internal frac;
struct ccu_mult_internal mult;
struct ccu_mux_internal mux;
struct ccu_common common;
--
git-series 0.8.11
More information about the linux-arm-kernel
mailing list