[PATCH] ARM: OMAP1/2: clock: Remove unused mpurate cmdline option

[Andrew Murray]

The 'mpurate' option, historically used for specifying an initial
MPU rate at boot, no longer has any effect due to the supporting
code being removed as it was 'wrong and dangerous' [1].

This patch removes the remaining dead code associated with the
__setup macros to avoid confusion and reduce bloat.

[1] https://patchwork.kernel.org/patch/5954631/

Signed-off-by: Andrew Murray <amurray at embedded-bits.co.uk>
---
 arch/arm/mach-omap1/clock.c | 20 --------------------
 arch/arm/mach-omap1/clock.h |  2 --
 arch/arm/mach-omap2/clock.c | 20 --------------------
 3 files changed, 42 deletions(-)

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4f5fd4a..43e3e18 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -720,26 +720,6 @@ EXPORT_SYMBOL(clk_get_parent);
  * OMAP specific clock functions shared between omap1 and omap2
  */
 
-int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
-	get_option(&str, &mpurate);
-
-	if (!mpurate)
-		return 1;
-
-	if (mpurate < 1000)
-		mpurate *= 1000000;
-
-	return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
 /* Used for clocks that always have same value as the parent clock */
 unsigned long followparent_recalc(struct clk *clk)
 {
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 1e4918a..f2d1be2 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -173,8 +173,6 @@ struct clk_functions {
 	void		(*clk_disable_unused)(struct clk *clk);
 };
 
-extern int mpurate;
-
 extern int clk_init(struct clk_functions *custom_clocks);
 extern void clk_preinit(struct clk *clk);
 extern int clk_register(struct clk *clk);
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d058125..d999295 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -112,26 +112,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
 	}
 }
 
-static int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
-	get_option(&str, &mpurate);
-
-	if (!mpurate)
-		return 1;
-
-	if (mpurate < 1000)
-		mpurate *= 1000000;
-
-	return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
 /**
  * omap2_clk_print_new_rates - print summary of current clock tree rates
  * @hfclkin_ck_name: clk name for the off-chip HF oscillator
-- 
2.5.0