[PATCH 2/4] ARM: imx6: remove PGC handling from GPC driver
Lucas Stach
l.stach at pengutronix.de
Fri Jan 20 07:52:23 PST 2017
This removes all functionality regarding the power gating controller
from the GPC driver. This will be added back in a re-written driver
outside of the architecture code.
This keeps only the IRQ controller code in the architecture, as this
is closely coupled to the CPU idle implementation.
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
arch/arm/mach-imx/gpc.c | 217 ------------------------------------------------
1 file changed, 217 deletions(-)
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 1dc2a34b9dbd..93f584ba0130 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -10,26 +10,17 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/clk.h>
-#include <linux/delay.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-#include <linux/pm_domain.h>
-#include <linux/regulator/consumer.h>
#include <linux/irqchip/arm-gic.h>
#include "common.h"
#include "hardware.h"
-#define GPC_CNTR 0x000
#define GPC_IMR1 0x008
-#define GPC_PGC_GPU_PDN 0x260
-#define GPC_PGC_GPU_PUPSCR 0x264
-#define GPC_PGC_GPU_PDNSCR 0x268
#define GPC_PGC_CPU_PDN 0x2a0
#define GPC_PGC_CPU_PUPSCR 0x2a4
#define GPC_PGC_CPU_PDNSCR 0x2a8
@@ -39,18 +30,6 @@
#define IMR_NUM 4
#define GPC_MAX_IRQS (IMR_NUM * 32)
-#define GPU_VPU_PUP_REQ BIT(1)
-#define GPU_VPU_PDN_REQ BIT(0)
-
-#define GPC_CLK_MAX 6
-
-struct pu_domain {
- struct generic_pm_domain base;
- struct regulator *reg;
- struct clk *clk[GPC_CLK_MAX];
- int num_clks;
-};
-
static void __iomem *gpc_base;
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
@@ -296,199 +275,3 @@ void __init imx_gpc_check_dt(void)
gpc_base = of_iomap(np, 0);
}
}
-
-static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
-{
- int iso, iso2sw;
- u32 val;
-
- /* Read ISO and ISO2SW power down delays */
- val = readl_relaxed(gpc_base + GPC_PGC_GPU_PDNSCR);
- iso = val & 0x3f;
- iso2sw = (val >> 8) & 0x3f;
-
- /* Gate off PU domain when GPU/VPU when powered down */
- writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
-
- /* Request GPC to power down GPU/VPU */
- val = readl_relaxed(gpc_base + GPC_CNTR);
- val |= GPU_VPU_PDN_REQ;
- writel_relaxed(val, gpc_base + GPC_CNTR);
-
- /* Wait ISO + ISO2SW IPG clock cycles */
- ndelay((iso + iso2sw) * 1000 / 66);
-}
-
-static int imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
-{
- struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
-
- _imx6q_pm_pu_power_off(genpd);
-
- if (pu->reg)
- regulator_disable(pu->reg);
-
- return 0;
-}
-
-static int imx6q_pm_pu_power_on(struct generic_pm_domain *genpd)
-{
- struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
- int i, ret, sw, sw2iso;
- u32 val;
-
- if (pu->reg)
- ret = regulator_enable(pu->reg);
- if (pu->reg && ret) {
- pr_err("%s: failed to enable regulator: %d\n", __func__, ret);
- return ret;
- }
-
- /* Enable reset clocks for all devices in the PU domain */
- for (i = 0; i < pu->num_clks; i++)
- clk_prepare_enable(pu->clk[i]);
-
- /* Gate off PU domain when GPU/VPU when powered down */
- writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
-
- /* Read ISO and ISO2SW power down delays */
- val = readl_relaxed(gpc_base + GPC_PGC_GPU_PUPSCR);
- sw = val & 0x3f;
- sw2iso = (val >> 8) & 0x3f;
-
- /* Request GPC to power up GPU/VPU */
- val = readl_relaxed(gpc_base + GPC_CNTR);
- val |= GPU_VPU_PUP_REQ;
- writel_relaxed(val, gpc_base + GPC_CNTR);
-
- /* Wait ISO + ISO2SW IPG clock cycles */
- ndelay((sw + sw2iso) * 1000 / 66);
-
- /* Disable reset clocks for all devices in the PU domain */
- for (i = 0; i < pu->num_clks; i++)
- clk_disable_unprepare(pu->clk[i]);
-
- return 0;
-}
-
-static struct generic_pm_domain imx6q_arm_domain = {
- .name = "ARM",
-};
-
-static struct pu_domain imx6q_pu_domain = {
- .base = {
- .name = "PU",
- .power_off = imx6q_pm_pu_power_off,
- .power_on = imx6q_pm_pu_power_on,
- },
-};
-
-static struct generic_pm_domain imx6sl_display_domain = {
- .name = "DISPLAY",
-};
-
-static struct generic_pm_domain *imx_gpc_domains[] = {
- &imx6q_arm_domain,
- &imx6q_pu_domain.base,
- &imx6sl_display_domain,
-};
-
-static struct genpd_onecell_data imx_gpc_onecell_data = {
- .domains = imx_gpc_domains,
- .num_domains = ARRAY_SIZE(imx_gpc_domains),
-};
-
-static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
-{
- struct clk *clk;
- int i, ret;
-
- imx6q_pu_domain.reg = pu_reg;
-
- for (i = 0; ; i++) {
- clk = of_clk_get(dev->of_node, i);
- if (IS_ERR(clk))
- break;
- if (i >= GPC_CLK_MAX) {
- dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX);
- goto clk_err;
- }
- imx6q_pu_domain.clk[i] = clk;
- }
- imx6q_pu_domain.num_clks = i;
-
- /* Enable power always in case bootloader disabled it. */
- imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
-
- if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
- return 0;
-
- imx6q_pu_domain.base.states = devm_kzalloc(dev,
- sizeof(*imx6q_pu_domain.base.states),
- GFP_KERNEL);
- if (!imx6q_pu_domain.base.states)
- return -ENOMEM;
-
- imx6q_pu_domain.base.states[0].power_off_latency_ns = 25000;
- imx6q_pu_domain.base.states[0].power_on_latency_ns = 2000000;
- imx6q_pu_domain.base.state_count = 1;
-
- for (i = 0; i < ARRAY_SIZE(imx_gpc_domains); i++)
- pm_genpd_init(imx_gpc_domains[i], NULL, false);
-
- ret = of_genpd_add_provider_onecell(dev->of_node,
- &imx_gpc_onecell_data);
- if (ret)
- goto power_off;
-
- return 0;
-
-power_off:
- imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
-clk_err:
- while (i--)
- clk_put(imx6q_pu_domain.clk[i]);
- imx6q_pu_domain.reg = NULL;
- return -EINVAL;
-}
-
-static int imx_gpc_probe(struct platform_device *pdev)
-{
- struct regulator *pu_reg;
- int ret;
-
- /* bail out if DT too old and doesn't provide the necessary info */
- if (!of_property_read_bool(pdev->dev.of_node, "#power-domain-cells"))
- return 0;
-
- pu_reg = devm_regulator_get_optional(&pdev->dev, "pu");
- if (PTR_ERR(pu_reg) == -ENODEV)
- pu_reg = NULL;
- if (IS_ERR(pu_reg)) {
- ret = PTR_ERR(pu_reg);
- dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret);
- return ret;
- }
-
- return imx_gpc_genpd_init(&pdev->dev, pu_reg);
-}
-
-static const struct of_device_id imx_gpc_dt_ids[] = {
- { .compatible = "fsl,imx6q-gpc" },
- { .compatible = "fsl,imx6sl-gpc" },
- { }
-};
-
-static struct platform_driver imx_gpc_driver = {
- .driver = {
- .name = "imx-gpc",
- .of_match_table = imx_gpc_dt_ids,
- },
- .probe = imx_gpc_probe,
-};
-
-static int __init imx_pgc_init(void)
-{
- return platform_driver_register(&imx_gpc_driver);
-}
-subsys_initcall(imx_pgc_init);
--
2.11.0
More information about the linux-arm-kernel
mailing list