[PATCH 0/3] ARM64: meson-gxbb: Add WeTek Boards
Kevin Hilman
khilman at baylibre.com
Fri Jan 20 07:50:07 PST 2017
Neil Armstrong <narmstrong at baylibre.com> writes:
> This serie adds support for the WeTek Hub and Play2 boards.
> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>
> Both are based on the p200 Reference Design and out-of-tree support is
> based on OpenELEC kernel at [1].
Applied to v4.11/dt64 after s/OpenELEC/LibreELEC/
Kevin
> [1] https://github.com/wetek-enigma/linux-amlogic
>
> Neil Armstrong (3):
> dt-bindings: vendor-prefix: Add wetek vendor prefix
> ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
> dt-bindings: amlogic: Add WeTek boards
>
> Documentation/devicetree/bindings/arm/amlogic.txt | 2 +
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/arm64/boot/dts/amlogic/Makefile | 2 +
> .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 66 +++++++++++++++
> .../boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 94 ++++++++++++++++++++++
> 5 files changed, 165 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
More information about the linux-arm-kernel
mailing list