[PATCH 6/8] arm64: dts: r8a7796: Add reset control properties
Geert Uytterhoeven
geert+renesas at glider.be
Fri Jan 20 06:08:24 PST 2017
Add properties to describe the reset topology for on-SoC devices:
- Add the "#reset-cells" property to the CPG/MSSR device node,
- Add resets and reset-names properties to the various device nodes.
This allows to reset SoC devices using the Reset Controller API.
Note that all resets added match the corresponding module clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 34 ++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 6591c76613687b40..e3286106a038e936 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -104,6 +104,7 @@
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
timer {
@@ -124,6 +125,7 @@
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
status = "disabled";
};
@@ -139,6 +141,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio at e6051000 {
@@ -153,6 +156,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio at e6052000 {
@@ -167,6 +171,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio at e6053000 {
@@ -181,6 +186,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio at e6054000 {
@@ -195,6 +201,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio at e6055000 {
@@ -209,6 +216,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio at e6055400 {
@@ -223,6 +231,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 906>;
};
gpio7: gpio at e6055800 {
@@ -237,6 +246,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
pfc: pin-controller at e6060000 {
@@ -251,6 +261,7 @@
clock-names = "extal", "extalr";
#clock-cells = <2>;
#power-domain-cells = <0>;
+ #reset-cells = <1>;
};
rst: reset-controller at e6160000 {
@@ -278,6 +289,7 @@
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
dmas = <&dmac1 0x91>, <&dmac1 0x90>,
<&dmac2 0x91>, <&dmac2 0x90>;
dma-names = "tx", "rx", "tx", "rx";
@@ -294,6 +306,7 @@
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
dmas = <&dmac1 0x93>, <&dmac1 0x92>,
<&dmac2 0x93>, <&dmac2 0x92>;
dma-names = "tx", "rx", "tx", "rx";
@@ -310,6 +323,7 @@
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
dmas = <&dmac1 0x95>, <&dmac1 0x94>,
<&dmac2 0x95>, <&dmac2 0x94>;
dma-names = "tx", "rx", "tx", "rx";
@@ -326,6 +340,7 @@
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
dmas = <&dmac0 0x97>, <&dmac0 0x96>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -341,6 +356,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
dmas = <&dmac0 0x99>, <&dmac0 0x98>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -356,6 +372,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -371,6 +388,7 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
@@ -389,6 +407,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -404,6 +423,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
@@ -420,6 +440,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
status = "disabled";
channel0 {
@@ -469,6 +490,7 @@
"ch24";
clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
phy-mode = "rgmii-id";
#address-cells = <1>;
#size-cells = <0>;
@@ -484,6 +506,7 @@
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 310>;
status = "disabled";
};
@@ -497,6 +520,7 @@
<&dmac2 0x41>, <&dmac2 0x40>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -512,6 +536,7 @@
<&dmac2 0x43>, <&dmac2 0x42>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -526,6 +551,7 @@
dmas = <&dmac0 0x45>, <&dmac0 0x44>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -540,6 +566,7 @@
dmas = <&dmac0 0x47>, <&dmac0 0x46>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -574,6 +601,7 @@
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -607,6 +635,7 @@
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -640,6 +669,7 @@
clocks = <&cpg CPG_MOD 217>;
clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -651,6 +681,7 @@
clocks = <&cpg CPG_MOD 314>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -661,6 +692,7 @@
clocks = <&cpg CPG_MOD 313>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
status = "disabled";
};
@@ -671,6 +703,7 @@
clocks = <&cpg CPG_MOD 312>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
status = "disabled";
};
@@ -681,6 +714,7 @@
clocks = <&cpg CPG_MOD 311>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
status = "disabled";
};
};
--
1.9.1
More information about the linux-arm-kernel
mailing list