[PATCH v3 2/3] spi: pxa2xx: Prepare for edge-triggered interrupts

[Jan Kiszka]

When using the a device with edge-triggered interrupts, such as MSIs,
the interrupt handler has to ensure that there is a point in time during
its execution where all interrupts sources are silent so that a new
event can trigger a new interrupt again.

This is achieved here by disabling all interrupt sources for a moment
before processing them according to the status register. If a new
interrupt should have arrived after we read the status, it will now
re-trigger the interrupt, even in edge mode.

Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---

Successfully tested by now.

Changes to v2:
- avoid inner looping by making the hardware retrigger on "forgotten"
  IRQ sources

 drivers/spi/spi-pxa2xx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 0d10090..f9c2329 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -785,6 +785,9 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
 	if (!(status & mask))
 		return IRQ_NONE;
 
+	pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg & ~drv_data->int_cr1);
+	pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
+
 	if (!drv_data->master->cur_msg) {
 		handle_bad_msg(drv_data);
 		/* Never fail */
-- 
2.1.4

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170119/035bfd45/attachment.sig>