[PATCH V5 10/12] drivers: acpi: Configure acpi devices dma operation at probe time

[Sricharan R]

With all the DT based devices getting their dma ops configured
during probe time to have the right iommu setup, let us do the
same for acpi based devices as well.

Configuring DMA ops at probe time will allow deferring device probe when
the IOMMU isn't available yet. The dma_configure for the device is
now called from the generic device_attach callback just before the
bus/driver probe is called. This way, configuring the DMA ops for the
device would be called at the same place for all bus_types, hence the
deferred probing mechanism should work for all buses as well.

Signed-off-by: Sricharan R <sricharan at codeaurora.org>
---
 * Removed the dma configuration for the pci devices in case of ACPI
   from pci_dma_configure which was hanging outside separately and
   doing it in dma_configure function itself.

 drivers/acpi/glue.c        |  5 -----
 drivers/base/dma-mapping.c | 13 ++++++++++++-
 drivers/pci/probe.c        | 25 -------------------------
 3 files changed, 12 insertions(+), 31 deletions(-)

diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index fb19e1c..c05f241 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -176,7 +176,6 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
 	struct list_head *physnode_list;
 	unsigned int node_id;
 	int retval = -EINVAL;
-	enum dev_dma_attr attr;
 
 	if (has_acpi_companion(dev)) {
 		if (acpi_dev) {
@@ -233,10 +232,6 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
 	if (!has_acpi_companion(dev))
 		ACPI_COMPANION_SET(dev, acpi_dev);
 
-	attr = acpi_get_dma_attr(acpi_dev);
-	if (attr != DEV_DMA_NOT_SUPPORTED)
-		acpi_dma_configure(dev, attr);
-
 	acpi_physnode_link_name(physical_node_name, node_id);
 	retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
 				   physical_node_name);
diff --git a/drivers/base/dma-mapping.c b/drivers/base/dma-mapping.c
index f82212c..294942d 100644
--- a/drivers/base/dma-mapping.c
+++ b/drivers/base/dma-mapping.c
@@ -7,6 +7,7 @@
  * This file is released under the GPLv2.
  */
 
+#include <linux/acpi.h>
 #include <linux/dma-mapping.h>
 #include <linux/export.h>
 #include <linux/gfp.h>
@@ -352,6 +353,7 @@ int dma_configure(struct device *dev)
 {
 	struct device *_dev = dev;
 	int is_pci = dev_is_pci(dev);
+	enum dev_dma_attr attr;
 	int ret = 0;
 
 	if (is_pci) {
@@ -361,8 +363,16 @@ int dma_configure(struct device *dev)
 			_dev = _dev->parent;
 	}
 
-	if (_dev->of_node)
+	if (_dev->of_node) {
 		ret = of_dma_configure(dev, _dev->of_node);
+	} else if (has_acpi_companion(_dev)) {
+		attr = acpi_get_dma_attr(to_acpi_device_node(_dev->fwnode));
+
+		if (attr == DEV_DMA_NOT_SUPPORTED)
+			dev_warn(dev, "DMA not supported.\n");
+		else
+			acpi_dma_configure(dev, attr);
+	}
 
 	if (is_pci)
 		pci_put_host_bridge_device(_dev);
@@ -373,4 +383,5 @@ int dma_configure(struct device *dev)
 void dma_deconfigure(struct device *dev)
 {
 	of_dma_deconfigure(dev);
+	acpi_dma_deconfigure(dev);
 }
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 634d34e..b86e9b1 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1862,30 +1862,6 @@ static void pci_set_msi_domain(struct pci_dev *dev)
 	dev_set_msi_domain(&dev->dev, d);
 }
 
-/**
- * pci_dma_configure - Setup DMA configuration
- * @dev: ptr to pci_dev struct of the PCI device
- *
- * Function to update PCI devices's DMA configuration using the same
- * info from the OF node or ACPI node of host bridge's parent (if any).
- */
-static void pci_dma_configure(struct pci_dev *dev)
-{
-	struct device *bridge = pci_get_host_bridge_device(dev);
-
-	if (has_acpi_companion(bridge)) {
-		struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
-		enum dev_dma_attr attr = acpi_get_dma_attr(adev);
-
-		if (attr == DEV_DMA_NOT_SUPPORTED)
-			dev_warn(&dev->dev, "DMA not supported.\n");
-		else
-			acpi_dma_configure(&dev->dev, attr);
-	}
-
-	pci_put_host_bridge_device(bridge);
-}
-
 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
 {
 	int ret;
@@ -1899,7 +1875,6 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
 	dev->dev.dma_mask = &dev->dma_mask;
 	dev->dev.dma_parms = &dev->dma_parms;
 	dev->dev.coherent_dma_mask = 0xffffffffull;
-	pci_dma_configure(dev);
 
 	pci_set_dma_max_seg_size(dev, 65536);
 	pci_set_dma_seg_boundary(dev, 0xffffffff);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation