[PATCH 2/4] ARM: dts: imx7d-sdp: Fix watchdog and pwm pinmux

Fabio Estevam festevam at gmail.com
Thu Jan 19 04:02:00 PST 2017


On Thu, Jan 19, 2017 at 7:09 AM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> The watchdog pin and the pwm output pin are controlled by the
> iomuxc_lpsr, not the regular iomux, so move the pins there.
>
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>

Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>

Just two minor nits that probably Shawn can take care while applying it"

in Subject there is a typo "sdb".

> ---
>  arch/arm/boot/dts/imx7d-sdb.dts | 26 ++++++++++++++------------
>  1 file changed, 14 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
> index 2f33c463cbce..84f35a6cbb30 100644
> --- a/arch/arm/boot/dts/imx7d-sdb.dts
> +++ b/arch/arm/boot/dts/imx7d-sdb.dts
> @@ -502,12 +502,6 @@
>                         >;
>                 };
>
> -               pinctrl_pwm1: pwm1grp {
> -                       fsl,pins = <
> -                               MX7D_PAD_GPIO1_IO01__PWM1_OUT           0x110b0
> -                       >;
> -               };
> -
>                 pinctrl_tsc2046_pendown: tsc2046_pendown {
>                         fsl,pins = <
>                                 MX7D_PAD_EPDC_BDR1__GPIO2_IO29          0x59
> @@ -635,11 +629,19 @@
>                                 MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
>                         >;
>                 };
> -
> -               pinctrl_wdog: wdoggrp {
> -                       fsl,pins = <
> -                               MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B       0x74
> -                       >;
> -               };
>         };
>  };
> +
> +&iomuxc_lpsr {
> +       pinctrl_wdog: wdoggrp {
> +               fsl,pins = <
> +                       MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B       0x74
> +               >;
> +       };
> +
> +       pinctrl_pwm1: pwm1grp {
> +               fsl,pins = <
> +                       MX7D_PAD_GPIO1_IO01__PWM1_OUT           0x110b0
> +               >;
> +       };
> +};
> \ No newline at end of file

This could be fixed as well.



More information about the linux-arm-kernel mailing list