[PATCH v2 0/3] Add support for Broadcom iProc mailbox controller
jonathan.richardson at broadcom.com
Wed Jan 18 17:39:37 PST 2017
This patch set contains mailbox support for Broadcom iProc based SoC's. The
mailbox controller handles all communication with a Cortex-M0 MCU processor that
provides support for power, clock, and reset management.
The patch set enables the mailbox controller for Cygnus and also interrupt
support for the Cygnus CRMU GPIO driver which requires use of the M0 processor.
Changes from v1:
- Interrupt handling has been removed and will be added to an interrupt
controller driver and sent out in a separate patchset.
- Moved location of bcm_iproc_mailbox.h to include/linux/mailbox as suggested by
- Removed reading of client timeout from driver and used canned timeout. This
removes the need of including the client mailbox header.
Jonathan Richardson (3):
dt-bindings: Document Broadcom iProc mailbox controller driver
mailbox: Add iProc mailbox controller driver
ARM: dts: Enable Broadcom iProc mailbox controller
.../bindings/mailbox/brcm,iproc-mailbox.txt | 14 ++
arch/arm/boot/dts/bcm-cygnus.dtsi | 6 +
drivers/mailbox/Kconfig | 10 ++
drivers/mailbox/Makefile | 2 +
drivers/mailbox/bcm-iproc-mailbox.c | 199 +++++++++++++++++++++
include/linux/mailbox/bcm_iproc_mailbox.h | 32 ++++
6 files changed, 263 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt
create mode 100644 drivers/mailbox/bcm-iproc-mailbox.c
create mode 100644 include/linux/mailbox/bcm_iproc_mailbox.h
More information about the linux-arm-kernel