[PATCH v3] arm64: dts: exynos: Remove unneeded unit names in Exynos5433 nodes

[Javier Martinez Canillas]

The "samsung,exynos5433-mipi-video-phy" and "samsung,exynos5250-dwusb3"
DT bindings don't specify a reg property for these nodes, so having a
unit name leads to the following DTC warnings:

Node /soc/video-phy at 105c0710 has a unit name, but no reg property
Node /soc/usb at 15400000 has a unit name, but no reg property
Node /soc/usb at 15a00000 has a unit name, but no reg property

Signed-off-by: Javier Martinez Canillas <javier at osg.samsung.com>

---

Changes in v3:
  - Use proper device node names, suggested by Krzysztof.

Changes in v2:
  - Fix subject line since I forgot the "exynos" prefix.

 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 59788d89b686..57c7bbeb65a7 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -706,7 +706,7 @@
 			interrupts = <GIC_PPI 9 0xf04>;
 		};
 
-		mipi_phy: video-phy at 105c0710 {
+		mipi_phy: video-phy {
 			compatible = "samsung,exynos5433-mipi-video-phy";
 			#phy-cells = <1>;
 			samsung,pmu-syscon = <&pmu_system_controller>;
@@ -1357,7 +1357,7 @@
 			status = "disabled";
 		};
 
-		usbdrd30: usb at 15400000  {
+		usbdrd30: usbdrd {
 			compatible = "samsung,exynos5250-dwusb3";
 			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
 				<&cmu_fsys CLK_SCLK_USBDRD30>;
@@ -1404,7 +1404,7 @@
 			status = "disabled";
 		};
 
-		usbhost30: usb at 15a00000 {
+		usbhost30: usbhost {
 			compatible = "samsung,exynos5250-dwusb3";
 			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
 				<&cmu_fsys CLK_SCLK_USBHOST30>;
-- 
2.7.4