[PATCH 1/4] phy: sun4i-usb: support PHY0 on H3 in MUSB mode
maxime.ripard at free-electrons.com
Tue Jan 17 12:06:58 PST 2017
On Wed, Jan 18, 2017 at 12:57:08AM +0800, Icenowy Zheng wrote:
> 17.01.2017, 16:06, "Maxime Ripard" <maxime.ripard at free-electrons.com>:
> > On Tue, Jan 17, 2017 at 03:14:46AM +0800, Icenowy Zheng wrote:
> >> The PHY0 on H3 can be wired either to MUSB controller or OHCI/EHCI
> >> controller.
> >> The original driver wired it to OHCI/EHCI controller; however, as the
> >> code to use PHY0 as OHCI/EHCI is missing, it makes the PHY fully
> >> unusable.
> >> Rename the register (according to its function and the name in BSP
> >> driver), and remove the code which wires the PHY0 to OHCI/EHCI, as MUSB
> >> can support both peripheral and host mode (although the host mode of
> >> MUSB is buggy).
> > Can you elaborate on that? What's wrong with it?
> The configuration is at bit 0 of register 0x20 in PHY.
> When the PHY is reseted, it defaults as MUSB mode.
> However, the original author of the H3 PHY code seems to be lack of
> this knowledge (He named it PHY_UNK_H3), and changed the PHY to HCI
> I just removed the code that wires it to HCI mode, thus it will work
> in MUSB mode, with my sun8i-h3-musb patch.
I have no idea what you mean by MUSB mode.
Do you mean that the previous code was only working in host mode, and
now it only works in peripheral?
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 801 bytes
Desc: not available
More information about the linux-arm-kernel