[PATCH] coresight: STM: Balance enable/disable

[Suzuki K Poulose]

The stm is automatically enabled when an application sets the policy
via ->link() call back by using coresight_enable(), which keeps the
refcount of the current users of the STM. However, the unlink() callback
issues stm_disable() directly, which leaves the STM turned off, without
the coresight layer knowing about it. This prevents any further uses
of the STM hardware as the coresight layer still thinks the STM is
turned on and doesn't enable the hardware when required. Even manually
enabling the STM via sysfs can't really enable the hw.

e.g,

 $ echo 1 > $CS_DEVS/$ETR/enable_sink
 $ mkdir -p $CONFIG_FS/stp-policy/$source.0/stm_test/
 $ echo 32768 65535 > $CONFIG_FS/stp-policy/$source.0/stm_test/channels
 $ echo 64 > $CS_DEVS/$source/traceid
 $ ./stm_app
 Sending 64000 byte blocks of pattern 0 at 0us intervals
 Success to map channel(32768~32783) to 0xffffa95fa000
 Sending on channel 32768
 $ dd if=/dev/$ETR of=~/trace.bin.1
 597+1 records in
 597+1 records out
 305920 bytes (306 kB) copied, 0.399952 s, 765 kB/s
 $ ./stm_app
 Sending 64000 byte blocks of pattern 0 at 0us intervals
 Success to map channel(32768~32783) to 0xffff7e9e2000
 Sending on channel 32768
 $ dd if=/dev/$ETR of=~/trace.bin.2
 0+0 records in
 0+0 records out
 0 bytes (0 B) copied, 0.0232083 s, 0.0 kB/s

 Note that we don't get any data from the ETR for the second session.

 Also dmesg shows :

 [   77.520458] coresight-tmc 20800000.etr: TMC-ETR enabled
 [   77.537097] coresight-replicator etr_replicator at 20890000: REPLICATOR enabled
 [   77.558828] coresight-replicator main_replicator at 208a0000: REPLICATOR enabled
 [   77.581068] coresight-funnel 208c0000.main_funnel: FUNNEL inport 0 enabled
 [   77.602217] coresight-tmc 20840000.etf: TMC-ETF enabled
 [   77.618422] coresight-stm 20860000.stm: STM tracing enabled
 [  139.554252] coresight-stm 20860000.stm: STM tracing disabled
  # End of first tracing session
 [  146.351135] coresight-tmc 20800000.etr: TMC read start
 [  146.514486] coresight-tmc 20800000.etr: TMC read end
  # Note that the STM is not turned on via stm_generic_link()->coresight_enable()
  # and hence none of the components are turned on.
 [  152.479080] coresight-tmc 20800000.etr: TMC read start
 [  152.542632] coresight-tmc 20800000.etr: TMC read end

This patch fixes the problem by balancing the unlink operation by using
the coresight_disable(), keeping the coresight layer in sync with the
hardware state and thus allowing normal usage of the STM component.

Fixes: commit 237483aa5cf43 ("coresight: stm: adding driver for CoreSight STM component")
Cc: Pratik Patel <pratikp at codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Cc: stable at vger.kernel.org # 4.7+
Acked-by: Mathieu Poirier <mathieu.poirier at linaro.org>
Reviewed-by: Chunyan Zhang <zhang.chunyan at linaro.org>
Reported-by: Robert Walker <robert.walker at arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose at arm.com>
---

Greg,

Without this patch, the coresight STM IP can only be used for one tracing
session per boot, seriously limiting its usability.

---
 drivers/hwtracing/coresight/coresight-stm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c
index e4c55c5..93fc26f 100644
--- a/drivers/hwtracing/coresight/coresight-stm.c
+++ b/drivers/hwtracing/coresight/coresight-stm.c
@@ -356,7 +356,7 @@ static void stm_generic_unlink(struct stm_data *stm_data,
 	if (!drvdata || !drvdata->csdev)
 		return;
 
-	stm_disable(drvdata->csdev, NULL);
+	coresight_disable(drvdata->csdev);
 }
 
 static phys_addr_t
-- 
2.7.4