[PATCHv3 RESEND 1/8] ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429
Alexandre Torgue
alexandre.torgue at st.com
Mon Jan 16 06:39:22 PST 2017
Hi Amélie,
On 01/16/2017 02:29 PM, Amelie Delaunay wrote:
> This patch set HSE_RTC clock frequency to 1 MHz, as the clock supplied to
> the RTC must be 1 MHz.
>
> Signed-off-by: Amelie Delaunay <amelie.delaunay at st.com>
> ---
> arch/arm/boot/dts/stm32f429.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index e9324a3..557c1f4 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -433,6 +433,8 @@
> reg = <0x40023800 0x400>;
> clocks = <&clk_hse>, <&clk_i2s_ckin>;
> st,syscfg = <&pwrcfg>;
> + assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
> + assigned-clock-rates = <1000000>;
> };
>
> dma1: dma-controller at 40026000 {
>
Applied on stm32-dt-for-v4.11
Thanks
Alex
More information about the linux-arm-kernel
mailing list