[PATCH v1 6/7] ARM: dts: stm32429i-eval: Enable ltdc & simple panel on Eval board

Yannick Fertre yannick.fertre at st.com
Mon Jan 16 05:29:03 PST 2017


Enable ltdc & enable am-480272h3tmqw-t01h panel.

Signed-off-by: Yannick Fertre <yannick.fertre at st.com>
---
 arch/arm/boot/dts/stm32429i-eval.dts | 58 ++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 2de6487..f987ca5 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -88,6 +88,52 @@
 		clocks = <&rcc 0 30>;
 		clock-names = "main_clk";
 	};
+
+	panel_rgb: panel-rgb {
+		compatible = "ampire,am-480272h3tmqw-t01h";
+		status = "okay";
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl_ltdc: ltdc at 0 {
+		pins {
+			pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
+				 <STM32F429_PI13_FUNC_LCD_VSYNC>,
+				 <STM32F429_PI14_FUNC_LCD_CLK>,
+				 <STM32F429_PI15_FUNC_LCD_R0>,
+				 <STM32F429_PJ0_FUNC_LCD_R1>,
+				 <STM32F429_PJ1_FUNC_LCD_R2>,
+				 <STM32F429_PJ2_FUNC_LCD_R3>,
+				 <STM32F429_PJ3_FUNC_LCD_R4>,
+				 <STM32F429_PJ4_FUNC_LCD_R5>,
+				 <STM32F429_PJ5_FUNC_LCD_R6>,
+				 <STM32F429_PJ6_FUNC_LCD_R7>,
+				 <STM32F429_PJ7_FUNC_LCD_G0>,
+				 <STM32F429_PJ8_FUNC_LCD_G1>,
+				 <STM32F429_PJ9_FUNC_LCD_G2>,
+				 <STM32F429_PJ10_FUNC_LCD_G3>,
+				 <STM32F429_PJ11_FUNC_LCD_G4>,
+				 <STM32F429_PJ12_FUNC_LCD_B0>,
+				 <STM32F429_PJ13_FUNC_LCD_B1>,
+				 <STM32F429_PJ14_FUNC_LCD_B2>,
+				 <STM32F429_PJ15_FUNC_LCD_B3>,
+				 <STM32F429_PK0_FUNC_LCD_G5>,
+				 <STM32F429_PK1_FUNC_LCD_G6>,
+				 <STM32F429_PK2_FUNC_LCD_G7>,
+				 <STM32F429_PK3_FUNC_LCD_B4>,
+				 <STM32F429_PK4_FUNC_LCD_B5>,
+				 <STM32F429_PK5_FUNC_LCD_B6>,
+				 <STM32F429_PK6_FUNC_LCD_B7>,
+				 <STM32F429_PK7_FUNC_LCD_DE>;
+			slew-rate = <2>;
+		};
+	};
 };
 
 &clk_hse {
@@ -123,3 +169,15 @@
 	pinctrl-names = "default";
 	status = "okay";
 };
+
+&ltdc_host{
+	status = "okay";
+	pinctrl-0 = <&pinctrl_ltdc>;
+	pinctrl-names = "default";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
-- 
1.9.1




More information about the linux-arm-kernel mailing list