[PATCH 09/37] PCI: dwc: designware: Parse *num-lanes* property in dw_pcie_setup_rc

Joao Pinto Joao.Pinto at synopsys.com
Mon Jan 16 02:23:10 PST 2017


Hi,

Às 5:19 AM de 1/16/2017, Kishon Vijay Abraham I escreveu:
> Hi,
> 
> On Friday 13 January 2017 10:43 PM, Joao Pinto wrote:
>> Hi,
>>
>> Às 10:25 AM de 1/12/2017, Kishon Vijay Abraham I escreveu:
>>> *num-lanes* dt property is parsed in dw_pcie_host_init. However
>>> *num-lanes* property is applicable to both root complex mode and
>>> endpoint mode. As a first step, move the parsing of this property
>>> outside dw_pcie_host_init. This is in preparation for splitting
>>> pcie-designware.c to pcie-designware.c and pcie-designware-host.c
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
>>> ---
>>>  drivers/pci/dwc/pcie-designware.c |   18 +++++++++++-------
>>>  drivers/pci/dwc/pcie-designware.h |    1 -
>>>  2 files changed, 11 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
>>> index 00a0fdc..89cdb6b 100644
>>> --- a/drivers/pci/dwc/pcie-designware.c
>>> +++ b/drivers/pci/dwc/pcie-designware.c
>>> @@ -551,10 +551,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
>>>  		}
>>>  	}
>>>  
>>> -	ret = of_property_read_u32(np, "num-lanes", &pci->lanes);
>>> -	if (ret)
>>> -		pci->lanes = 0;
>>> -
>>>  	ret = of_property_read_u32(np, "num-viewport", &pci->num_viewport);
>>>  	if (ret)
>>>  		pci->num_viewport = 2;
>>> @@ -751,18 +747,26 @@ static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
>>>  
>>>  void dw_pcie_setup_rc(struct pcie_port *pp)
>>>  {
>>> +	int ret;
>>> +	u32 lanes;
>>>  	u32 val;
>>>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>>> +	struct device *dev = pci->dev;
>>> +	struct device_node *np = dev->of_node;
>>>  
>>>  	/* get iATU unroll support */
>>>  	pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci);
>>>  	dev_dbg(pci->dev, "iATU unroll: %s\n",
>>>  		pci->iatu_unroll_enabled ? "enabled" : "disabled");
>>>  
>>> +	ret = of_property_read_u32(np, "num-lanes", &lanes);
>>> +	if (ret)
>>> +		lanes = 0;
>>
>> You moved from host_init to root complex setup function, which in my opinion did
>> not improve (in this scope).
>>
>> I suggest that instead of making so much intermediary patches, which is nice to
>> understand your development sequence, but hard to review. Wouldn't be better to
>> condense some of the patches? We would have a cloear vision of the final product :)
> 
> I thought the other way. If squashing patches is easier to review, I'll do it.

I understand. To break it in small pieces is good to understand clearly what is
done and how was done, but I would break too much. That's a personal opinion of
course, lets see what others say :).

Thanks,
Joao

> 
> Btw, thanks for reviewing.
> 
> Cheers
> Kishon
> 




More information about the linux-arm-kernel mailing list