[PATCH v6 2/3] input: tm2-touchkey: Add touchkey driver support for TM2
Jaechul Lee
jcsing.lee at samsung.com
Sun Jan 15 23:24:47 PST 2017
Dear Dmitry Torokhov,
On Sat, Jan 14, 2017 at 11:11:10PM -0800, Dmitry Torokhov wrote:
> Hi Jaechul,
>
> On Mon, Jan 09, 2017 at 04:22:14PM +0900, Jaechul Lee wrote:
> > +static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
> > +{
> > + struct tm2_touchkey_data *touchkey = devid;
> > + u32 data;
> > +
> > + data = i2c_smbus_read_byte_data(touchkey->client,
> > + TM2_TOUCHKEY_KEYCODE_REG);
> > +
> > + if (data < 0) {
>
> You declared data as u32 so it will never be negative.
Yes, it won't be negative.
>
> > + dev_err(&touchkey->client->dev, "Failed to read i2c data\n");
> > + return IRQ_HANDLED;
> > + }
> > +
> > + touchkey->keycode_type = data & TM2_TOUCHKEY_BIT_KEYCODE;
> > + touchkey->pressed = !(data & TM2_TOUCHKEY_BIT_PRESS_EV);
>
> There is no need to store this in touchkey structure as you are not
> going to use it past this function.
I agree with you. it doesn't need to store variables in touchkey structure.
>
> Does the version of the patch below work for you?
I found that the condition is inverted.
if data & TM2_TOUCHKEY_BIT_PRESS_EV is true, it means touchkey is released.
it should be changed like this.
if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
input_report_key(touchkey->input_dev, KEY_PHONE, 0);
input_report_key(touchkey->input_dev, KEY_BACK, 0);
} else {
input_report_key(touchkey->input_dev, key, 1);
}
I will prepare for patch v7 based on your modifications.
Thank you very much for your reviews.
Best Regards,
Jaechul
>
> Thanks.
>
> --
> Dmitry
>
>
> Input: tm2-touchkey - add touchkey driver support for TM2
>
> From: Jaechul Lee <jcsing.lee at samsung.com>
>
> This patch adds support for the TM2 touch key and led functionality.
>
> The driver interfaces with userspace through an input device and
> reports KEY_PHONE and KEY_BACK event types. LED brightness can be
> controlled by "/sys/class/leds/tm2-touchkey/brightness".
>
> Signed-off-by: Beomho Seo <beomho.seo at samsung.com>
> Signed-off-by: Jaechul Lee <jcsing.lee at samsung.com>
> Reviewed-by: Javier Martinez Canillas <javier at osg.samsung.com>
> Reviewed-by: Andi Shyti <andi.shyti at samsung.com>
> Acked-by: Krzysztof Kozlowski <krzk at kernel.org>
> Patchwork-Id: 9504149
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
> ---
> drivers/input/keyboard/Kconfig | 11 +
> drivers/input/keyboard/Makefile | 1
> drivers/input/keyboard/tm2-touchkey.c | 286 +++++++++++++++++++++++++++++++++
> 3 files changed, 298 insertions(+)
> create mode 100644 drivers/input/keyboard/tm2-touchkey.c
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index cbd75cf44739..97acd6524ad7 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -666,6 +666,17 @@ config KEYBOARD_TC3589X
> To compile this driver as a module, choose M here: the
> module will be called tc3589x-keypad.
>
> +config KEYBOARD_TM2_TOUCHKEY
> + tristate "TM2 touchkey support"
> + depends on I2C
> + depends on LEDS_CLASS
> + help
> + Say Y here to enable device driver for tm2-touchkey with
> + LED control for the Exynos5433 TM2 board.
> +
> + To compile this driver as a module, choose M here.
> + module will be called tm2-touchkey.
> +
> config KEYBOARD_TWL4030
> tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
> depends on TWL4030_CORE
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index d9f4cfcf3410..7d9acff819a7 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o
> obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
> obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
> obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o
> +obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o
> obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
> obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
> obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
> diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c
> new file mode 100644
> index 000000000000..79bc2d2bd4b9
> --- /dev/null
> +++ b/drivers/input/keyboard/tm2-touchkey.c
> @@ -0,0 +1,286 @@
> +/*
> + * TM2 touchkey device driver
> + *
> + * Copyright 2005 Phil Blundell
> + * Copyright 2016 Samsung Electronics Co., Ltd.
> + *
> + * Author: Beomho Seo <beomho.seo at samsung.com>
> + * Author: Jaechul Lee <jcsing.lee at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/pm.h>
> +#include <linux/regulator/consumer.h>
> +
> +#define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey"
> +#define TM2_TOUCHKEY_KEYCODE_REG 0x03
> +#define TM2_TOUCHKEY_BASE_REG 0x00
> +#define TM2_TOUCHKEY_CMD_LED_ON 0x10
> +#define TM2_TOUCHKEY_CMD_LED_OFF 0x20
> +#define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3)
> +#define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0)
> +#define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000
> +#define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000
> +
> +enum {
> + TM2_TOUCHKEY_KEY_MENU = 0x1,
> + TM2_TOUCHKEY_KEY_BACK,
> +};
> +
> +struct tm2_touchkey_data {
> + struct i2c_client *client;
> + struct input_dev *input_dev;
> + struct led_classdev led_dev;
> + struct regulator *vdd;
> + struct regulator_bulk_data regulators[2];
> +};
> +
> +static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
> + enum led_brightness brightness)
> +{
> + struct tm2_touchkey_data *touchkey =
> + container_of(led_dev, struct tm2_touchkey_data, led_dev);
> + u32 volt;
> + u8 data;
> +
> + if (brightness == LED_OFF) {
> + volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
> + data = TM2_TOUCHKEY_CMD_LED_OFF;
> + } else {
> + volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
> + data = TM2_TOUCHKEY_CMD_LED_ON;
> + }
> +
> + regulator_set_voltage(touchkey->vdd, volt, volt);
> + i2c_smbus_write_byte_data(touchkey->client,
> + TM2_TOUCHKEY_BASE_REG, data);
> +}
> +
> +static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
> +{
> + int error;
> +
> + error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators),
> + touchkey->regulators);
> + if (error)
> + return error;
> +
> + /* waiting for device initialization, at least 150ms */
> + msleep(150);
> +
> + return 0;
> +}
> +
> +static void tm2_touchkey_power_disable(void *data)
> +{
> + struct tm2_touchkey_data *touchkey = data;
> +
> + regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators),
> + touchkey->regulators);
> +}
> +
> +static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
> +{
> + struct tm2_touchkey_data *touchkey = devid;
> + int data;
> + int key;
> +
> + data = i2c_smbus_read_byte_data(touchkey->client,
> + TM2_TOUCHKEY_KEYCODE_REG);
> + if (data < 0) {
> + dev_err(&touchkey->client->dev,
> + "failed to read i2c data: %d\n", data);
> + goto out;
> + }
> +
> + switch (data & TM2_TOUCHKEY_BIT_KEYCODE) {
> + case TM2_TOUCHKEY_KEY_MENU:
> + key = KEY_PHONE;
> + break;
> +
> + case TM2_TOUCHKEY_KEY_BACK:
> + key = KEY_BACK;
> + break;
> +
> + default:
> + dev_warn(&touchkey->client->dev,
> + "unhandled keycode, data %#02x\n", data);
> + goto out;
> + }
> +
> + if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
> + input_report_key(touchkey->input_dev, key, 1);
> + } else {
> + input_report_key(touchkey->input_dev, KEY_PHONE, 0);
> + input_report_key(touchkey->input_dev, KEY_BACK, 0);
> + }
> +
> + input_sync(touchkey->input_dev);
> +
> +out:
> + return IRQ_HANDLED;
> +}
> +
> +static int tm2_touchkey_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct tm2_touchkey_data *touchkey;
> + int error;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) {
> + dev_err(&client->dev, "incompatible I2C adapter\n");
> + return -EIO;
> + }
> +
> + touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL);
> + if (!touchkey)
> + return -ENOMEM;
> +
> + touchkey->client = client;
> + i2c_set_clientdata(client, touchkey);
> +
> + touchkey->regulators[0].supply = "vcc";
> + touchkey->regulators[1].supply = "vdd";
> + error = devm_regulator_bulk_get(&client->dev,
> + ARRAY_SIZE(touchkey->regulators),
> + touchkey->regulators);
> + if (error) {
> + dev_err(&client->dev, "failed to get regulators: %d\n", error);
> + return error;
> + }
> +
> + /* Save VDD for easy access */
> + touchkey->vdd = touchkey->regulators[1].consumer;
> +
> + error = tm2_touchkey_power_enable(touchkey);
> + if (error) {
> + dev_err(&client->dev, "failed to power up device: %d\n", error);
> + return error;
> + }
> +
> + error = devm_add_action_or_reset(&client->dev,
> + tm2_touchkey_power_disable, touchkey);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to install poweroff handler: %d\n", error);
> + return error;
> + }
> +
> + /* input device */
> + touchkey->input_dev = devm_input_allocate_device(&client->dev);
> + if (!touchkey->input_dev) {
> + dev_err(&client->dev, "failed to allocate input device\n");
> + return -ENOMEM;
> + }
> +
> + touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
> + touchkey->input_dev->id.bustype = BUS_I2C;
> +
> + input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE);
> + input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK);
> +
> + input_set_drvdata(touchkey->input_dev, touchkey);
> +
> + error = input_register_device(touchkey->input_dev);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to register input device: %d\n", error);
> + return error;
> + }
> +
> + error = devm_request_threaded_irq(&client->dev, client->irq,
> + NULL, tm2_touchkey_irq_handler,
> + IRQF_ONESHOT,
> + TM2_TOUCHKEY_DEV_NAME, touchkey);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to request threaded irq: %d\n", error);
> + return error;
> + }
> +
> + /* led device */
> + touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
> + touchkey->led_dev.brightness = LED_FULL;
> + touchkey->led_dev.max_brightness = LED_FULL;
> + touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set;
> +
> + error = devm_led_classdev_register(&client->dev, &touchkey->led_dev);
> + if (error) {
> + dev_err(&client->dev,
> + "failed to register touchkey led: %d\n", error);
> + return error;
> + }
> +
> + return 0;
> +}
> +
> +static int __maybe_unused tm2_touchkey_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
> +
> + disable_irq(client->irq);
> + tm2_touchkey_power_disable(touchkey);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused tm2_touchkey_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client);
> + int ret;
> +
> + enable_irq(client->irq);
> +
> + ret = tm2_touchkey_power_enable(touchkey);
> + if (ret)
> + dev_err(dev, "failed to enable power: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops,
> + tm2_touchkey_suspend, tm2_touchkey_resume);
> +
> +static const struct i2c_device_id tm2_touchkey_id_table[] = {
> + { TM2_TOUCHKEY_DEV_NAME, 0 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table);
> +
> +static const struct of_device_id tm2_touchkey_of_match[] = {
> + { .compatible = "cypress,tm2-touchkey", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match);
> +
> +static struct i2c_driver tm2_touchkey_driver = {
> + .driver = {
> + .name = TM2_TOUCHKEY_DEV_NAME,
> + .pm = &tm2_touchkey_pm_ops,
> + .of_match_table = of_match_ptr(tm2_touchkey_of_match),
> + },
> + .probe = tm2_touchkey_probe,
> + .id_table = tm2_touchkey_id_table,
> +};
> +module_i2c_driver(tm2_touchkey_driver);
> +
> +MODULE_AUTHOR("Beomho Seo <beomho.seo at samsung.com>");
> +MODULE_AUTHOR("Jaechul Lee <jcsing.lee at samsung.com>");
> +MODULE_DESCRIPTION("Samsung touchkey driver");
> +MODULE_LICENSE("GPL v2");
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list