[PATCH 2/4] ARM64: dts: meson-gx: add the serial CTS and RTS pin groups

[Martin Blumenstingl]

This adds pinctrl group nodes for the CTS and RTS pins of each serial
controller. This makes it possible to enable the CTS and RTS pins which
are controlled by the serial controller hardware (through the meson_uart
driver).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 40 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 40 +++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 474435e21759..f001c4d007bc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -138,6 +138,14 @@
 			};
 		};
 
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
 		uart_ao_b_pins: uart_ao_b {
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
@@ -145,6 +153,14 @@
 			};
 		};
 
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
 		remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
@@ -290,6 +306,14 @@
 			};
 		};
 
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
 		uart_b_pins: uart_b {
 			mux {
 				groups = "uart_tx_b",
@@ -298,6 +322,14 @@
 			};
 		};
 
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
 		uart_c_pins: uart_c {
 			mux {
 				groups = "uart_tx_c",
@@ -306,6 +338,14 @@
 			};
 		};
 
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
 		i2c_a_pins: i2c_a {
 			mux {
 				groups = "i2c_sck_a",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 53ed7a5f50ab..7d7fd87f094b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -82,6 +82,14 @@
 			};
 		};
 
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
 		uart_ao_b_pins: uart_ao_b {
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
@@ -89,6 +97,14 @@
 			};
 		};
 
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
 		remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
@@ -164,6 +180,14 @@
 			};
 		};
 
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
 		uart_b_pins: uart_b {
 			mux {
 				groups = "uart_tx_b",
@@ -172,6 +196,14 @@
 			};
 		};
 
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
 		uart_c_pins: uart_c {
 			mux {
 				groups = "uart_tx_c",
@@ -180,6 +212,14 @@
 			};
 		};
 
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
 		i2c_a_pins: i2c_a {
 			mux {
 				groups = "i2c_sck_a",
-- 
2.11.0