[PATCH 11/37] PCI: dwc: Split pcie-designware.c into host and core files

Joao Pinto Joao.Pinto at synopsys.com
Fri Jan 13 08:49:44 PST 2017


Às 10:26 AM de 1/12/2017, Kishon Vijay Abraham I escreveu:
> Split pcie-designware.c into pcie-designware-host.c that contains
> the host specific parts of the driver and pcie-designware.c that
> contains the parts used by both host driver and endpoint driver.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
>  drivers/pci/dwc/Makefile               |    2 +-
>  drivers/pci/dwc/pcie-designware-host.c |  619 ++++++++++++++++++++++++++++++++
>  drivers/pci/dwc/pcie-designware.c      |  613 +------------------------------
>  drivers/pci/dwc/pcie-designware.h      |    8 +
>  4 files changed, 634 insertions(+), 608 deletions(-)
>  create mode 100644 drivers/pci/dwc/pcie-designware-host.c
> 
> diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
> index 7d27c14..3b57e55 100644
> --- a/drivers/pci/dwc/Makefile
> +++ b/drivers/pci/dwc/Makefile
> @@ -1,4 +1,4 @@

(snip...)

> -static void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
> -				      int type, u64 cpu_addr, u64 pci_addr,
> -				      u32 size)
> +void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
> +			       u64 cpu_addr, u64 pci_addr, u32 size)
>  {
>  	u32 retries, val;
>  
> @@ -186,220 +151,6 @@ static void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
>  	dev_err(pci->dev, "iATU is not being enabled\n");
>  }

Kishon, iATU only makes sense in The Root Complex (host), so it should be inside
the pcie-designware-host.

>  
> -static struct irq_chip dw_msi_irq_chip = {
> -	.name = "PCI-MSI",
> -	.irq_enable = pci_msi_unmask_irq,
> -	.irq_disable = pci_msi_mask_irq,
> -	.irq_mask = pci_msi_mask_irq,
> -	.irq_unmask = pci_msi_unmask_irq,
> -};
> -

(snip...)

> -
> -static const struct irq_domain_ops msi_domain_ops = {
> -	.map = dw_pcie_msi_map,
> -};
> -
>  static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
>  {
>  	u32 val;
> @@ -454,303 +192,11 @@ static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
>  	return 0;
>  }

Kishon, iATU only makes sense in The Root Complex (host), so it should be inside
the pcie-designware-host.

(snip...)

> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
> index 491fbe3..808d17b 100644
> --- a/drivers/pci/dwc/pcie-designware.h
> +++ b/drivers/pci/dwc/pcie-designware.h
> @@ -14,6 +14,10 @@
>  #ifndef _PCIE_DESIGNWARE_H
>  #define _PCIE_DESIGNWARE_H
>  
> +#include <linux/irq.h>
> +#include <linux/msi.h>
> +#include <linux/pci.h>
> +
>  /* Parameters for the waiting for link up routine */
>  #define LINK_WAIT_MAX_RETRIES		10
>  #define LINK_WAIT_USLEEP_MIN		90000
> @@ -167,4 +171,8 @@ struct dw_pcie {
>  void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val);
>  int dw_pcie_link_up(struct dw_pcie *pci);
>  int dw_pcie_wait_for_link(struct dw_pcie *pci);
> +void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
> +			       int type, u64 cpu_addr, u64 pci_addr,
> +			       u32 size);
> +void dw_pcie_setup(struct dw_pcie *pci);


Kishon, iATU only makes sense in The Root Complex (host), so it should be inside
the pcie-designware-host as static.

>  #endif /* _PCIE_DESIGNWARE_H */
> 

Thanks,
Joao



More information about the linux-arm-kernel mailing list