[PATCH v5] arm64: dts: mt8173: add mmsel clocks for 4K support

[Matthias Brugger]

On 12/01/17 05:50, Daniel Kurtz wrote:
> Hi Matthias,
>
> (Trying again to send plain text email)...
>
> On Thu, Aug 4, 2016 at 10:57 AM, Bibby Hsieh <bibby.hsieh at mediatek.com> wrote:
>> To support HDMI 4K resolution, mmsys need clcok
>> mm_sel to be 400MHz.
>>
>> The board .dts file should override the clock rate
>> property with the higher VENCPLL frequency the board
>> supports HDMI 4K resolution.
>>
>> Signed-off-by: Bibby Hsieh <bibby.hsieh at mediatek.com>
>
> Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>
>

Applied to v4.10-next/dts
Thanks

>
> It looks like this patch was lost.  It is actually a prerequisite for
> MTK 4k HDMI support, which already landed in v4.9.
>
> See the email thread entitled:
> [PATCH v5 0/3] MT8173 HDMI 4K support <https://lkml.org/lkml/2016/9/28/893>
>
> Or these three:
>
> 0d2200794f0a drm/mediatek: modify the factor to make the pll_rate set
> in the 1G-2G range
> 968253bd7caa drm/mediatek: enhance the HDMI driving current
> d542b7c473f0 drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
>
> -Dan
>
>> ---
>>  arch/arm64/boot/dts/mediatek/mt8173.dtsi |    2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> index 78529e4..c3f32f3 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> @@ -690,6 +690,8 @@
>>                         compatible = "mediatek,mt8173-mmsys", "syscon";
>>                         reg = <0 0x14000000 0 0x1000>;
>>                         power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>> +                       assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
>> +                       assigned-clock-rates = <400000000>;
>>                         #clock-cells = <1>;
>>                 };
>>
>> --
>> 1.7.9.5
>>